Contents15
- Which way to share a keyboard and mouse
- How a KVM differs, and how fast USB needs to be
- Wireless devices, and ways to share without a switch
- Gaming mice and webcams
- Using it with a work PC or a Mac
- Picks by situation
- Wired keyboard and mouse only
- How this was researched
- FAQ
- Do I need a KVM to share just a keyboard and mouse between two computers?
- Do I need USB 2.0 or USB 3.x for a keyboard and mouse switch?
- Can a USB switch share a Bluetooth keyboard and mouse?
- Is sharing software or a USB switch better?
- Can I use it with a work computer and a personal one?
- Does a USB switch need an AC adapter?
To share one keyboard and mouse between two computers while each keeps its own monitor, a USB switch with no video is enough for wired devices. Bluetooth devices use their own multi-device pairing if they pair with several computers. Receivers depend on the device, and sharing software works if both computers share a network, you may install it, and it supports both systems.
A USB switch is a small box that moves your USB devices between two computers. A receiver is the small USB dongle a wireless device talks to, and multi-device pairing lets one wireless device remember several computers and change between them with a button.
Which way to share a keyboard and mouse
A wired keyboard and mouse use a USB switch, and wireless ones depend on how they connect and what else should switch with them. USB 2.0 and USB 3.x are generations of the USB standard, and 3.x moves data faster.
| Situation | Method | Verdict | Check first |
|---|---|---|---|
| Wired keyboard and mouse only | USB 2.0 switch | Yes | At least 2 USB ports |
| Wired keyboard and mouse, plus a flash drive or SSD | USB 3.x switch | Yes; check manuals for storage | USB 3.x with at least 3 ports |
| Wireless keyboard and mouse with a USB receiver | USB 2.0 switch (plug in the receiver) | Depends on the device | Whether the receiver works through a switch |
| Bluetooth only; no software | Multi-device pairing on the keyboard and mouse | Depends on the device | Whether the keyboard and mouse pair with several computers |
A yes means the method works if the row’s condition is met; depends means it varies by device. The table assumes no software, a separate monitor for each computer, and nothing tested on real units.
If the keyboard and mouse connect differently, read each device’s row and pick methods that cover both. For a wired keyboard and a Bluetooth mouse, the keyboard goes through a USB switch. The mouse uses multi-device pairing if it supports it.
Sharing software is an option on any row, if both computers are on the same network, you may install it on both, and it supports both systems and your devices.
Pick how your keyboard and mouse connect, what else should switch and whether software is allowed to see the method that fits.
How a KVM differs, and how fast USB needs to be
A KVM is a switch that shares one keyboard, monitor and mouse across several computers. ATEN and TESmart describe a KVM as switching the monitor’s picture as well as the keyboard and mouse. TESmart describes a USB switch as moving only USB devices and staying out of the video path.
In this guide’s view, a USB 2.0 (480 Mbps) switch is enough for just a keyboard and mouse. If a flash drive or SSD joins wired devices, USB 3.x is the pick. Storage devices were outside the research, so this guide sticks to the keyboard and mouse and leaves storage to the manuals.
Plugging in the keyboard and mouse separately takes 2 USB ports on the switch. A single-port switch only works for a combo that shares one receiver.
Wireless devices, and ways to share without a switch
A switch moves whatever is plugged into its USB ports. A Bluetooth keyboard or mouse pairs directly with each computer and has nothing to plug in, so the switch does not move it. TESmart’s blog likewise says Bluetooth devices pair directly with each computer and are switched on the device or in the OS.
Wireless devices with a USB receiver can plug the receiver into the switch, but whether they work depends on the device. StarTech’s manual says many wireless devices do not work through a KVM. Logitech lists KVMs and USB hubs as unsupported and says to plug a Logi Bolt receiver (Logitech’s own receiver) straight into the computer.
TESmart’s blog also notes that a receiver may be dropped by one computer and detected again by the other each time you switch.
Logitech’s Easy-Switch keyboards pair with up to 3 computers and switch at the press of a button. Enhanced Easy-Switch, where the mouse follows the keyboard, needs Logi Options+ on every computer and a Bluetooth or Logi Bolt connection.
Microsoft’s Mouse Without Borders lets one keyboard and mouse control up to 4 computers on the same network. Move the cursor past the screen edge to jump to the next one, and share the clipboard and files too.
Logitech Flow lets a Logitech mouse cross to the next computer at the screen edge. Logitech’s page says it works across 2 or 3 computers on the same network, set by how many devices the mouse can switch between. That page is for the retired Logitech Options app, and the current Logi Options+ terms are not covered here.
With a Mac and a Windows PC, check each app’s page for support on both systems; the sources checked here (October 28, 2026) did not list supported operating systems.
Gaming mice and webcams
StarTech’s manual and ATEN’s FAQ say a KVM’s dedicated keyboard and mouse ports present your devices as basic ones. Extra mouse buttons and macros (a series of actions assigned to one button) may not work.
The UGREEN picks’ spec pages say nothing about extra mouse buttons or macros.
Take care if a webcam switches too. Logitech’s support says to check that an undetected webcam is not going through a USB hub or dock. It also says to try a USB 2.0 port instead of USB 3.0.
Using it with a work PC or a Mac
No official rule on plugging a personal USB switch into a work PC, or installing sharing software on it, turned up in the sources checked here (October 2026). Check your company’s IT policy.
To switch between a Mac and a Windows PC, check the supported OS line. The USB 2.0 pick lists Windows and macOS; the USB 3.x pick’s spec page lists no supported OS.
Picks by situation
Both picks are for a wired keyboard and mouse; Bluetooth devices are out of scope, and whether a receiver works through them depends on the device. Each pick is the cheapest listing meeting its condition among Amazon.com listings checked on October 28, 2026: 100+ ratings, 4+ stars, sold new by Amazon or the maker.
Wired keyboard and mouse only
The UGREEN USB 2.0 Switch, 2 in 4 out (30767) is a USB switch with 4 USB 2.0 ports and no video. It connects to each computer with a USB-A cable and lists no AC adapter.
Sold by UGREEN GROUP LIMITED.
- Wired devices plus a flash drive or similar: UGREEN USB-C Switch, 10Gbps (25164)
The UGREEN USB-C Switch, 10Gbps (25164) has 4 USB 3.2 Gen 2 ports at 10 Gbps, 1 USB-C and 3 USB-A. It connects to each computer by USB-C, runs without extra power, and switches by remote or button.
Check the device’s and the switch’s manuals on handling storage devices.
The US official page describes it as sharing devices between 2 USB-C computers, and lists no cable or adapter for a USB-A computer, so check before buying.
The picks switch with a button on the box. Some other models switch by a keyboard hotkey or a separate desk button.
Check prices on each store’s page.
How this was researched
Manufacturer spec pages and support articles, and Amazon.com listings, were checked in October 2026. Nothing was tested on real devices.
The choice among the three methods, and the view that USB 2.0 is enough, are this guide’s own reasoning. The values and sources used are in “Data and formulas used” at the end.
FAQ
Do I need a KVM to share just a keyboard and mouse between two computers?
No. If the monitors stay put, a USB switch with no video is enough for a wired keyboard and mouse; a KVM also switches video. Receiver devices depend on the device, and Bluetooth devices are not moved by a switch.
Do I need USB 2.0 or USB 3.x for a keyboard and mouse switch?
By this guide’s reasoning, USB 2.0 is enough. If a flash drive or SSD joins wired devices, USB 3.x (5 Gbps or more) is the pick; check the manuals on storage.
Can a USB switch share a Bluetooth keyboard and mouse?
A USB switch does not move them, since Bluetooth devices connect straight to each computer. If the keyboard and mouse pair with several computers, use that pairing; otherwise sharing software works on the same network if you may install it and it supports both systems.
Is sharing software or a USB switch better?
A USB switch does not depend on the network or install permission; software saves buying a switch but needs the same network, permission and support for both systems.
Can I use it with a work computer and a personal one?
It depends on company rules; no official standard turned up in the sources checked here (October 2026), so ask your IT team.
Does a USB switch need an AC adapter?
It depends on the model; the two switches picked here list no AC adapter, but check the power line of the spec sheet for any other model.
Data and formulas used (for verification)
Method
- Covers Amazon.com listings and manufacturer specifications checked on 2026-10-28; items not found are marked as not found. Nothing was tested on real devices. Reddit and similar forums were not read.
- The split between a USB switch and a KVM follows ATEN and TESmart (a KVM also switches video; a USB switch switches only USB devices). Multi-device pairing follows Logitech’s Easy-Switch pages, and software sharing follows Microsoft (Mouse Without Borders) and Logitech (Flow). Choosing among the three methods is this guide’s own summary.
- The keyboard and mouse are assumed to take 1 to 2 USB ports (1 if one receiver serves both); the US picks are sized for 2. Sharing a flash drive too adds one more port and USB 3.x (5 Gbps or more). USB speeds are USB-IF signaling rates, not measured transfer speeds. Software sharing assumes both computers are on the same network, you may install it, and it supports both systems.
- The two US picks use the specifications on UGREEN’s US official pages for models 30767 and 25164. The US pick conditions are 100 or more ratings, 4 or more stars, and sold new by Amazon or the maker. Listings flagged by a third-party review-trust check were excluded.
Assumptions
- USB ports the keyboard and mouse take: 2 for two cables or two receivers, 1 for a combo sharing one receiver. The higher end (2) sets the pick conditions (this guide’s assumption).: 2 (1–2)
- Extra port needed when a flash drive or SSD is shared too: at least one (this guide’s assumption).
Official values used
| Item | Value | Source | Checked |
|---|---|---|---|
| KVM vs USB switch (does video pass through) | A KVM switches several computers with one keyboard, monitor and mouse, and it switches the monitor’s picture too (some models share USB devices as well). A USB switch (a shared switch for USB peripherals) switches only USB devices and stays out of the video path. A KVM adds one device between the GPU and the monitor (per ATEN and TESmart). | aten.com | 2026-10-28 |
| KVM keyboard/mouse (emulated) ports: limits | A KVM’s dedicated keyboard and mouse ports present the devices as basic keyboards and mice (emulation), so special functions such as extra buttons and macros may not work. StarTech’s manual says many KVMs do not support the extra functions of gaming or combination mice and keyboards and that this can affect the KVM, and recommends a 3-button wired mouse and a 104-key wired keyboard. ATEN’s FAQ also says that with mouse emulation on, some special mouse functions may not work. | sgcdn.startech.com | 2026-10-28 |
| KVM USB hub ports vs hotkeys and vendor software | StarTech’s manual says hotkeys do not work if the keyboard is plugged into a USB hub port, and describes the hub ports as for sharing peripherals along with the computer switch. TESmart’s blog says the regular shared USB ports act like a switchable USB hub, and that a receiver may be dropped by one computer and detected again by the other each time you switch. | sgcdn.startech.com | 2026-10-28 |
| Wireless (receiver) devices and KVM | StarTech’s manual says some wireless mice and keyboards do work with KVMs but most do not, and advises moving the receiver to a USB hub port, then switching to wired if that fails (hotkeys stop working). Logitech lists third-party devices such as KVM switches, USB hubs and docks as unsupported because they can interfere, and says to plug a Logi Bolt receiver straight into the computer. | sgcdn.startech.com | 2026-10-28 |
| Bluetooth devices bypass the KVM | TESmart’s blog explains that Bluetooth pairs the keyboard and mouse directly with each computer, bypassing the KVM’s USB path, so switching is done on the device or in the OS. Logitech’s Easy-Switch keyboards pair with up to 3 computers and switch between them. | tesmart.com | 2026-10-28 |
| Logitech Easy-Switch multi-pairing | Logitech says an Easy-Switch keyboard pairs with up to 3 computers, and a short press of the Easy-Switch button changes channels. Enhanced Easy-Switch makes the mouse follow the keyboard’s switch; it needs Logi Options+ on every computer being switched and a Bluetooth or Logi Bolt connection (Unifying and wired are not supported). | support.logi.com | 2026-10-28 |
| Microsoft Mouse Without Borders | Microsoft says PowerToys’ Mouse Without Borders can control up to four computers from the same machine, with keyboard and mouse sharing, clipboard sharing and file transfer. The computers must be on the same network, and you move between them by moving the cursor past the screen edge. Controlling the lock screen or apps running as administrator requires running it as a service (with a security risk warning). | learn.microsoft.com | 2026-10-28 |
| Logitech Flow | Logitech says Flow switches between computers automatically when the mouse cursor moves to the screen edge, and lets you copy and paste text, images and files. All computers must be on the same network, and it supports two or three computers depending on how many Easy-Switch devices the mouse supports. The page is for Logitech Options, which it says is no longer supported. | support.logi.com | 2026-10-28 |
| USB 2.0 vs USB 3.x speeds | Per USB-IF, USB 2.0 hi-speed is 480 Mb/s. USB 3.2 has transfer rates of 5 Gbps, 10 Gbps and 20 Gbps, and products are labeled by transfer rate, such as “USB 5Gbps” and “USB 10Gbps”. These are signaling rates; real speeds are lower. | usb.org | 2026-10-28 |
| Webcams and USB devices via KVM/hubs | Logitech’s support page says that if a webcam is not detected, check that it is not connected to a USB hub or docking station, and try a USB 2.0 port instead of USB 3.0 (it does not mention KVMs). A StarTech staff reply says connecting to a USB 3 port rather than the KVM’s HID (keyboard and mouse) port might work, with no guarantee. | support.logi.com | 2026-10-28 |
| UGREEN 30767: USB ports and speed | On the US official page, it is a USB switch that shares four USB 2.0 (480 Mbps) devices between two computers, with four USB ports. | us.ugreen.com 2 in 4 Out | 2026-10-28 |
| UGREEN 30767: power and PC-side connection | The US official page lists two USB A to A cables, so the PC side is USB-A. It mentions no AC adapter and gives an operating voltage of 5 V. Switching is by a single button with an LED indicator. | us.ugreen.com 5 Volts | 2026-10-28 |
| UGREEN 25164: USB ports and speed | The US official page lists four USB 3.2 Gen 2 ports (one USB-C and three USB-A) at up to 10 Gbps. | us.ugreen.com 10Gbps Transfer Speed: The USB-C switch is equipped with 4 USB 3.2 Gen 2 ports a | 2026-10-28 |
| UGREEN 25164: power and PC-side connection | The US official page says it works without additional power, with a maximum output of 2.4 A, and switches by remote control or button. It describes sharing devices between 2 USB-C computers. | us.ugreen.com Performance Upgrade: Simple Plug and play and enough to drive most devices witho | 2026-10-28 |
Share a keyboard and mouse: quick reference
The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.
| Settings | Result | Calculator |
|---|---|---|
| Wired, Keyboard and mouse only, Not allowed or unsure | ✓ USB 2.0 switch fits. For a keyboard and mouse alone, USB 2.0 should be enough. You need 2 or more ports. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Wired, Flash drive or SSD too, Not allowed or unsure | ✓ USB 3.x switch fits. A flash drive switches too, so USB 3.x (5 Gbps or more), with 3 or more ports. A USB 3.x switch with only 2 ports is filled by the keyboard and mouse. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Wired, Keyboard and mouse only, Same network, allowed | ✓ USB 2.0 switch fits. For a keyboard and mouse alone, USB 2.0 should be enough. You need 2 or more ports. If both are on the same network, software is allowed and it supports both systems, sharing software also works. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Wired, Flash drive or SSD too, Same network, allowed | ✓ USB 3.x switch fits. A flash drive switches too, so USB 3.x (5 Gbps or more), with 3 or more ports. A USB 3.x switch with only 2 ports is filled by the keyboard and mouse. If both are on the same network, software is allowed and it supports both systems, sharing software also works. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| USB receiver, Keyboard and mouse only, Not allowed or unsure | △ USB 2.0 switch (depends on the receiver). Plug the receiver into the switch. Whether it works through the switch depends on the device. Logitech lists KVMs and USB hubs as unsupported and says to plug a Logi Bolt receiver straight into the computer. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| USB receiver, Flash drive or SSD too, Not allowed or unsure | △ USB 3.x switch (depends on the receiver). Plug the receiver into the switch. Whether it works through the switch depends on the device. Logitech lists KVMs and USB hubs as unsupported and says to plug a Logi Bolt receiver straight into the computer. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| USB receiver, Keyboard and mouse only, Same network, allowed | △ USB 2.0 switch (depends on the receiver). Plug the receiver into the switch. Whether it works through the switch depends on the device. Logitech lists KVMs and USB hubs as unsupported and says to plug a Logi Bolt receiver straight into the computer. If both are on the same network, software is allowed and it supports both systems, sharing software also works. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Bluetooth only, Same network, allowed | ✓ Sharing software fits. Bluetooth devices have nothing to plug into a switch, so control computers on the same network with software (up to 4). Software needs both computers on the same network, installed on each, and support for both systems and your devices. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Bluetooth only, Not allowed or unsure | △ Multi-device pairing (if your devices support it). Bluetooth devices have nothing to plug into a switch, so switch with the devices’ own pairing (Easy-Switch: up to 3). A wired keyboard and mouse can be switched with a USB switch instead; with a receiver, it depends on the device. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |
| Bluetooth only, Not allowed or unsure | △ Multi-device pairing (if your devices support it). Bluetooth devices have nothing to plug into a switch, so switch with the devices’ own pairing (Easy-Switch: up to 3). A wired keyboard and mouse can be switched with a USB switch instead; with a receiver, it depends on the device. Check your company’s rules before using personal devices or software on a work PC | Open with these settings |


