Contents15

If you only need one keyboard and mouse for both computers and the screens stay as they are, get a USB switch. If the monitor’s picture should switch with the same button, get a KVM. A monitor with a built-in KVM may make a separate one unnecessary.

If the monitor has 2 or more inputs that match both computers’ video ports, there is another way. Plug each computer straight into its own input and switch only the keyboard and mouse with a USB switch. Switching then takes two presses: the monitor’s input button and the USB switch.

A KVM is a box that shares one keyboard, video monitor and mouse between computers. A USB switch is a smaller box that shares only USB devices.

Check the video port and monitor inputs first

If each computer keeps its own monitor, skip this step. If you share one monitor, check two things. If you can’t tell, hold off on deciding.

  1. Whether the work laptop’s USB-C port can output video. Look for the video ports on the laptop’s spec sheet.
  2. How many inputs the monitor has. Count them on the back of the monitor and on its spec sheet.

If you are not sure how the work laptop outputs video, hold off and check its spec sheet. USB-C ports look alike but some carry no video; Dell points to a DisplayPort or lightning-bolt mark by the port.

A USB-C port that outputs video uses a feature called DP Alt Mode (DisplayPort over USB-C). Per the makers’ official spec pages as of October 2026, the USB-C KVM picks need USB-C ports with video (DP Alt Mode) on both computers. A desktop that outputs video only over HDMI or DisplayPort cannot connect.

Which setup fits your situation

Situation Setup Verdict Check first
Each computer keeps its own monitor USB switch Yes At least 2 USB ports (keyboard and mouse)
One monitor with 2+ inputs that match both computers; switching the monitor and USB separately is fine Direct cables + USB switch Yes The number and type of monitor inputs (HDMI, USB-C, etc.)
One button for one monitor; both output HDMI HDMI KVM Yes The KVM’s stated resolution and Hz, and the USB plug on the computer side
One button for one monitor; both output video over USB-C USB-C KVM Yes Both USB-C ports support video (DP Alt Mode)
One button for one monitor; a USB-C-only laptop and an HDMI computer HDMI KVM + USB-C to HDMI cable Check first The adapter cable’s resolution and Hz
Unsure which port the work laptop uses for video On hold (check the video output) Check first The laptop’s spec sheet (video ports)
The monitor itself has a built-in KVM May not need a separate one Check first Which video input pairs with which USB upstream port

Verdicts are this article’s summary, and every row assumes the computers’ video ports match the monitor (or KVM) inputs. With a one-input monitor, use the one-button rows. Yes means it works; Check first means confirm before buying.

With separate monitors, the first row settles it. You only need to check the laptop’s video port if you share a monitor. In a USB-C and HDMI mix, check the video conversion and how each computer connects by USB as two separate questions.

Pick your monitor setup, how you want to switch and how each computer outputs video to see the setup that fits.

USB switch or KVM?

Pick your monitor setup, how you want to switch, and how the work laptop and your own computer output video. It shows the setup that fits (USB switch, direct cables plus a USB switch, HDMI KVM or USB-C KVM) and a pick.

Keyboard and mouse ports, and wireless devices

For just a keyboard and mouse, a USB 2.0 (480 Mbps) switch should be enough, though that is an estimate, not an official figure. If you also share fast devices such as a USB SSD, pick a USB 3.x switch (5 Gbps or more).

A KVM’s dedicated keyboard and mouse ports present your devices to the computer as basic ones, so extra buttons and macros may not work. You can try the KVM’s USB hub port instead; StarTech’s manual says hotkeys then stop working for a keyboard on that port.

A switch moves whatever is plugged into its USB ports, so a Bluetooth keyboard or mouse paired directly with each computer is not part of it.

Logitech’s Easy-Switch keyboards can pair with up to 3 computers and switch with a button. The monitor’s picture does not switch, so they do not replace a KVM. Enhanced Easy-Switch, which moves the mouse along, needs Logi Options+ on every computer.

Wireless devices with a USB receiver can plug the receiver into the switch, but StarTech’s manual says many wireless devices do not work through a KVM. Logitech lists KVMs as unsupported and says to plug a Logi Bolt receiver straight into the computer.

Video conditions when choosing a KVM

If the monitor has only one input, or you want a single button for everything, use a KVM. Pick an HDMI KVM if both computers output HDMI, or a USB-C KVM if both are laptops that output video over USB-C.

Per the makers’ official spec pages, the KVM picks are all rated up to 4K at 60Hz. Full HD and QHD at 60Hz need less than that, so this guide treats them as supported. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate.

By this guide’s calculation, sending 4K at 60Hz over USB-C on 2 lanes alongside USB 3 data takes about 12.5-12.8 Gbps. That is a borderline fit for DP 1.4 at 12.96 Gbps and too much for DP 1.2 at 8.64 Gbps. With a 4K monitor, check the laptop’s DP version on its spec sheet, since Cable Matters notes some laptops are limited to 30Hz on its USB-C KVM.

To mix a USB-C-only laptop and an HDMI computer on one button, use an HDMI KVM with a USB-C to HDMI cable. No mixed-input KVM met the criteria among Amazon listings checked on October 28, 2026. If two presses are fine and the monitor has 2+ inputs that match both computers, direct cables plus a USB switch also work.

In a mixed setup, check the video connection and the USB connection to each computer separately. Check how the HDMI KVM pick connects to each computer by USB on its official spec; the combination with an adapter cable was not tested. Check that the cable supports your resolution and refresh rate.

EDID emulation keeps the resolution and screen size from changing each time you switch. ATEN’s description covers resolution and size only, not where your windows end up. Whether a model has it is on its spec sheet.

With a built-in KVM, each computer connects by a video cable plus a USB cable (or one USB-C cable that also carries video), and you switch in the monitor’s menu. On some models a USB-C port carries data only, so check which ports pair up in the manual.

What to watch with a work laptop

No official rule on plugging a personal KVM or USB switch into a work laptop was found in the sources checked (October 2026). Check your company’s IT policy.

No official word on whether a KVM or USB switch affects a VPN or security was found in the sources checked (October 2026). Check with your company’s IT team.

Software such as Microsoft’s Mouse Without Borders or Logitech Flow can also share a keyboard and mouse between computers on the same network. Whether you may install it on a work PC is up to your company too.

Picks by situation

Each pick is the cheapest listing meeting its condition among Amazon.com listings checked on October 28, 2026: 100+ ratings, 4+ stars, sold new by Amazon or the maker. Both KVM picks have fewer than 100 ratings and are listed as exceptions: sold new by the maker, model number matched, 4+ stars.

Sharing only a keyboard and mouse

The UGREEN USB 2.0 Switch, 2 in 4 out (30767) is a USB switch with 4 USB 2.0 ports and no video.

Sold by UGREEN GROUP LIMITED.

Two computers that output HDMI, sharing one monitor

The TESmart HKS201-P23 is a 2-computer HDMI KVM rated up to 4K at 60Hz (4:4:4), with USB 3.0 sharing and a 12V adapter. The Amazon.com page says P23 without V2, and whether it is the V2 version is not confirmed.

Sold by TESmart. It has only 68 ratings so far.

Two laptops that output video over USB-C, switched together

The Cable Matters 201478 switches 2 USB-C laptops to one HDMI monitor at up to 4K 60Hz, and charges each at up to 85W when both are connected.

Sold by Cable Matters. It has only 16 ratings so far.

How this was researched

This guide reads manufacturer spec pages, manuals and the USB and DisplayPort standards as of October 2026, and works out the video data rate from the standard’s formula. The products were not tested. On company rules and VPNs, no official standard turned up, so the guide covers only what was checked.

FAQ

What is the difference between a KVM and a USB switch?

A KVM switches the monitor’s picture as well as the keyboard and mouse. A USB switch moves only USB devices and stays out of the video path.

If my monitor has two inputs, do I still need a KVM?

If the monitor has 2 or more inputs that match both computers’ video ports, you do not need a KVM. Plug each computer into its own input and switch only the keyboard and mouse with a USB switch.

That takes two presses, and the picture is the same as a direct connection.

Can I plug a personal KVM into my work laptop?

No official rule on plugging a personal KVM or USB switch into a work laptop was found in the sources checked (October 2026). Check your company’s IT policy.

Does a KVM affect my VPN or company security?

No official word on whether a KVM or USB switch affects a VPN or security was found in the sources checked (October 2026). Check with your company’s IT team.

Data and formulas used (for verification)

Method

  • Covers Amazon.com listings and manufacturer specifications checked on 2026-10-28; items not found are marked as not found. Nothing was tested on real devices.
  • The split between a USB switch, a KVM and a monitor with a built-in KVM is this article’s summary of ATEN and TESmart (a KVM also switches video; a USB switch switches only USB devices) and of BenQ and ASUS on built-in KVMs.
  • The video data rate (Gbps) is (horizontal pixels + horizontal blank) × vertical pixels ÷ (1 − 460µs × Hz) × Hz × 24 bits, the same formula as the USB-C hub guides. Horizontal blank spans 80 to 160 pixels. The low end is rounded down and the high end up.
  • Over USB-C with USB 3 data at the same time, 2 lanes carry 12.96 Gbps on DP 1.4 (half of 25.92 Gbps over 4 lanes) and 5.4 Gbps × 2 lanes × 0.8 = 8.64 Gbps on DP 1.2 (both this article’s math). A mode fits if its whole range fits, is borderline below 10% headroom, depends on the signal if only part fits, and does not fit otherwise.
  • Modes at 60Hz or less that need less bandwidth than the KVM’s stated maximum (4K at 60Hz) are treated as supported (this article’s rule). Above 60Hz, only what the spec page states counts.
  • TESmart HKS201-P23 (68 ratings) and Cable Matters 201478 (16) are listed as exceptions to the 100-rating rule: sold new by the maker or Amazon, model number matched, 4+ stars. The Amazon.com page for the TESmart reads P23 without V2; whether it is the V2 is not confirmed.

Assumptions

  • Horizontal blanking in pixels: 80 px (CVT-RB2) to 160 px (original CVT-RB). Which one a monitor uses varies, so both ends are kept (same as the USB-C hub guides). TV timings use more blanking and need more bandwidth.: 160 (80–160)
  • Minimum vertical blanking time of CVT reduced blanking (460 µs). Assumed from the standard.
  • Bits per pixel: 8-bit RGB (24 bit). 10-bit HDR is not covered.
  • Less than 10% headroom is called borderline (same as TIGHT_RATIO in calc-helpers).
  • KVM spec pages usually list only the maximum (such as 4K at 60Hz). Modes at 60Hz or less that need less bandwidth are treated as supported; above 60Hz only what the page states counts (this article’s rule).

Official values used

Item Value Source Checked
KVM vs USB switch (does video pass through) A KVM shares one keyboard, monitor and mouse between several computers and switches the monitor’s picture too (some models also share USB devices). A USB switch moves only USB devices and stays out of the video path. A KVM adds one more device between the GPU and the monitor (ATEN and TESmart explanations). aten.com 2026-10-28
EDID emulation EDID is the display information a monitor sends to a computer (read over DDC). ATEN says a switch with no EDID handling can make a computer lose the EDID when the channel changes. For models that store EDID and answer on each port (ATEN calls it Video DynaSync), the makers say the screen resolution and size do not change on switching. Neither maker’s material says window positions are kept. aten.com 2026-10-28
EDID emulation is not on every KVM Level1Techs’ sales page for one DP KVM says its EDID engine is for HDCP re-keying and it does not support monitor emulation, so windows may be rearranged on switching. Whether a model has EDID emulation has to be checked on its spec sheet. store.level1techs.com 2026-10-28
KVM keyboard/mouse (emulated) ports: limits A KVM’s dedicated keyboard and mouse ports present your devices to the computer as basic ones (emulation), so extra buttons and macros may not work. StarTech’s manual says many KVMs do not support the extra functions of gaming and combination mice and keyboards, and recommends a 3-button wired mouse and a 104-key wired keyboard. ATEN’s FAQ also says special mouse features may not work with mouse emulation enabled. sgcdn.startech.com 2026-10-28
KVM USB hub ports vs hotkeys and vendor software StarTech’s manual says hotkeys are not available when the keyboard is plugged into a USB hub port, and describes the hub ports as for sharing peripherals along with the computer switching. TESmart’s blog says a regular shared USB port behaves like a switched USB hub, and a receiver may disconnect from one computer and re-enumerate on the other when switching. sgcdn.startech.com 2026-10-28
Wireless (receiver) devices and KVM StarTech’s manual says some wireless mice and keyboards work with KVMs but most do not; if there is a problem, move the receiver to a USB hub port, and if that fails use a wired device (hotkeys then stop working). Logitech does not support third-party devices such as KVM switches, USB hubs and docks because they can interfere with communication, and says to plug a Logi Bolt receiver directly into the computer. sgcdn.startech.com 2026-10-28
Bluetooth devices bypass the KVM TESmart’s blog says Bluetooth bypasses the KVM’s USB path because the keyboard and mouse pair directly with each computer, and switching is done on the device or in the operating system. Logitech’s Easy-Switch keyboards pair with up to 3 computers and switch between them. tesmart.com 2026-10-28
Logitech Easy-Switch multi-pairing Logitech says an Easy-Switch keyboard can pair with up to 3 computers and a short press of the Easy-Switch button changes the channel. Enhanced Easy-Switch makes the mouse follow the keyboard automatically; it needs Logi Options+ on every computer being switched and a Bluetooth or Logi Bolt connection (Unifying and wired are not supported). support.logi.com 2026-10-28
Microsoft Mouse Without Borders Microsoft says PowerToys’ Mouse Without Borders lets you control up to 4 computers from the same machine, sharing keyboard, mouse, clipboard and files. The computers must be on the same network, and you switch by moving the cursor past the screen edge. Controlling the lock screen or elevated apps needs running it as a service (with a security risk note). learn.microsoft.com 2026-10-28
Logitech Flow Logitech says Flow switches between computers automatically when you move the mouse cursor to the screen edge, and lets you copy and paste text, images and files. All computers must be on the same network, and it supports 2 or 3 computers depending on the mouse’s Easy-Switch count. The page is for Logitech Options, which it says is end-of-support. support.logi.com 2026-10-28
How monitor-built-in KVM works BenQ says a monitor-built-in KVM puts the KVM switch inside the monitor; two source devices connect by USB-C/Thunderbolt, or by an HDMI/DisplayPort cable plus a USB upstream cable, and you switch in the on-screen KVM settings (with Auto, USB follows the input switch). ASUS also says that with two devices connected to the monitor, one keyboard and mouse control both. benq.com BenQ. “A KVM switch on a monitor directly integrates the KVM switch into the mon 2026-10-28
Monitor KVM: video-capable USB-C vs data-only upstream ASUS’s Auto KVM FAQ says upstream port 1 is USB-C and can carry video, while port 2 is data-only USB-C with no video, so it is used together with an HDMI or DisplayPort input. A Dell representative (U2723QE community answer) also says the USB-C video input carries video plus data and the USB-C upstream is data only. Some models need a separate video cable to send video from the second computer. asus.com 2026-10-28
USB 2.0 vs USB 3.x speeds USB-IF material gives USB 2.0 hi-speed as 480 Mb/s. USB 3.2 has 5, 10 and 20 Gbps transfer rates, and products are labeled by rate such as USB 5Gbps or USB 10Gbps. These are signaling rates; real speeds are lower. usb.org 2026-10-28
Webcams and USB devices via KVM/hubs Logitech support says that if a webcam is not recognized, check that it is not on a USB hub or dock and try a USB 2.0 port if it is on USB 3.0 (it does not mention KVMs). A StarTech staff answer says plugging it into a KVM’s USB 3 port instead of the HID ports may work, with no guarantee. support.logi.com 2026-10-28
KVM specs are resolution x Hz pairs (one example) Level1Techs’ DP KVM (one model) lists one DP 1.4 connection from each computer (up to 4K/120Hz or 8K/30Hz), says lower resolutions allow higher refresh rates (144Hz at 1440p), no overclocking, and DSC supported. KVM specs list maximum resolution and maximum Hz separately, so check the resolution and Hz pair you will use. store.level1techs.com 2026-10-28
DP 1.4 HBR3 bandwidth DP 1.4 (HBR3) is 8.1 Gbps per lane, 32.4 Gbps over 4 lanes, and the video payload without overhead is 25.92 Gbps. With 2 lanes it halves in proportion (about 13 Gbps; this is a division estimate not written in the sources, so call it this article’s calculation). vesa.org VESA 2017. “supports a total bandwidth of 32.4 Gbps when using all four lanes in 2026-10-26
DP 1.4 resolutions by lanes VESA slide hosted by USB-IF (DP 1.4a, maximum link rate, single-display examples): uncompressed, 5K60 (24bpp) on 4 lanes and 4K60 (24bpp) on 2 lanes. With DSC, 8K60 (30bpp) on 4 lanes and 5K60 (24bpp) on 2 lanes. usb.org 2026-10-26
DP Alt Mode lanes DisplayPort Alt Mode can use 1, 2 or 4 of the USB-C connector’s 4 high-speed lanes for video. With 2 lanes for video, the other 2 lanes can carry USB 3 data at the same time. With all 4 lanes for video, only USB 2.0 remains on separate pins (no USB 3 data at the same time). 2 lanes is the common setup for USB-C DP Alt Mode (VESA slide hosted by USB-IF). vesa.org 2026-10-26
HDMI 2.0 bandwidth HDMI 2.0 is 18 Gbps and carries 4K at 60Hz. Premium High Speed cables are certified for 4K at 18 Gbps. hdmi.org 2026-10-26
Laptop USB-C video output Not every laptop USB-C port supports video output. Dell says to connect a dock only to a USB-C port that has a DisplayPort icon, a lightning bolt or a power icon next to it, and to check the port type on the laptop’s spec sheet. Intel also says ordinary USB-C ports may have variable speeds with no guarantee of display quality. PD is not on every port either (StarTech). dell.com 2026-10-26
DP 1.2 (HBR2) in Alt Mode Early DP Alt Mode implementations mostly use DP 1.2a at 5.4 Gbps per lane (HBR2). With all 4 lanes, that supports up to 4K at 60Hz with 30-bit color. vesa.org 2026-10-26
UGREEN 30767 (USB switch) official specs USB switch with no video, for 2 computers. 4 USB 2.0 (480Mbps) peripheral ports. Includes 2 USB A-to-A cables. us.ugreen.com allows one button swapping between 2 computers to share 4 USB 2.0 peripheral dev 2026-10-28
TESmart HKS201-P23 (HDMI KVM) official specs HDMI KVM for 2 computers with a USB 3.0 hub. Up to 3840x2160@60Hz 4:4:4, HDMI 2.0. Shared USB 3.0 up to 5Gbps; dedicated keyboard and mouse ports. Needs the 12V DC adapter. tesmart.com 2 Port KVM Switch Kit HDMI 4K60Hz with USB 3.0 Docking Station, 2 PCs 1 Monitor 2026-10-28
Cable Matters 201478 (USB-C KVM) official specs USB-C KVM for 2 laptops, HDMI out up to 4K@60Hz when each laptop supports DP Alt Mode; some laptops are limited to 30Hz. PD up to 100W with one laptop, 85W each with two. Includes a 180W adapter. cablematters.com Dual USB-C Host KVM for 2 Laptops: Connect two USB-C/Thunderbolt laptops to shar 2026-10-28

USB switch or KVM?: quick reference

The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.

Settings Result Calculator
One per computer ✓ USB switch fits. The monitors stay as they are, so a USB switch moves only the keyboard and mouse. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, Monitor input by hand, Has HDMI, HDMI video (desktop etc.) ✓ Direct + USB switch fits. Plug each computer into its own monitor input and switch only the keyboard and mouse with a USB switch (monitor and USB switched separately). This assumes the monitor’s inputs match both computers’ video ports. The video never passes through the switch, so it is the same as a direct connection. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, Monitor input by hand, Video over USB-C, HDMI video (desktop etc.) △ Direct + USB switch (no mixed KVM pick). Plug each computer into its own monitor input and switch with a USB switch (monitor and USB switched separately). If the monitor has no USB-C input, you need a USB-C to HDMI cable. The video never passes through the switch, so it is the same as a direct connection. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, Monitor input by hand, Not sure, HDMI video (desktop etc.) △ On hold: check the video output first. On hold until you check the work laptop’s video ports. If both can be wired directly, a USB switch is enough. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, One button for all, Has HDMI, HDMI video (desktop etc.) ✓ HDMI KVM fits. The picture switches too, so a KVM. Both output HDMI, so an HDMI KVM. The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, One button for all, Video over USB-C, Laptop with USB-C video ✓ USB-C KVM fits. The picture switches too, so a KVM. Both output video over USB-C, so a USB-C KVM. The USB-C KVM picks need USB-C ports with video (DP Alt Mode) on both computers. When 4K at 60Hz shares USB-C with USB 3 data (2 lanes), it only just fits if the laptop’s USB-C supports DP 1.4 (the newer video standard), and does not fit the older DP 1.2 (this article’s math). The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 2+ inputs, One button for all, Video over USB-C, HDMI video (desktop etc.) △ HDMI KVM + adapter (no mixed KVM pick). No KVM pick mixes USB-C and HDMI, so use an HDMI KVM with a USB-C to HDMI cable. If switching the monitor and USB separately is fine, you can also wire both directly and use a USB switch. Check the adapter cable supports your resolution and refresh rate. The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Has HDMI, HDMI video (desktop etc.) ✓ HDMI KVM fits. The picture switches too, so a KVM. Both output HDMI, so an HDMI KVM. The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Video over USB-C, Laptop with USB-C video ✓ USB-C KVM fits. The picture switches too, so a KVM. Both output video over USB-C, so a USB-C KVM. The USB-C KVM picks need USB-C ports with video (DP Alt Mode) on both computers. When 4K at 60Hz shares USB-C with USB 3 data (2 lanes), it only just fits if the laptop’s USB-C supports DP 1.4 (the newer video standard), and does not fit the older DP 1.2 (this article’s math). The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Video over USB-C, HDMI video (desktop etc.) △ HDMI KVM + adapter (no mixed KVM pick). No KVM pick mixes USB-C and HDMI, so use an HDMI KVM with a USB-C to HDMI cable. Check the adapter cable supports your resolution and refresh rate. The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Has HDMI, Laptop with USB-C video △ HDMI KVM + adapter (no mixed KVM pick). No KVM pick mixes USB-C and HDMI, so use an HDMI KVM with a USB-C to HDMI cable. Check the adapter cable supports your resolution and refresh rate. The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Not sure, HDMI video (desktop etc.) △ On hold: check the video output first. On hold until you check the work laptop’s video ports. If the work laptop outputs HDMI, an HDMI KVM; if it has only USB-C, an HDMI KVM with a USB-C to HDMI cable (△). The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings
One, 1 input, Not sure, Laptop with USB-C video △ On hold: check the video output first. On hold until you check the work laptop’s video ports. If the work laptop outputs video over USB-C, a USB-C KVM; if it has only HDMI, an HDMI KVM with an adapter cable (△). The KVM picks are rated up to 4K at 60Hz. Above 60Hz, choose a KVM whose spec lists your exact resolution and refresh rate. A Bluetooth keyboard or mouse paired directly with each computer is not switched by the switch. Check your company’s rules before plugging personal devices into a work laptop Open with these settings