Contents13

Going by manuals as of October 2026, a wired keyboard and mouse switch through a KVM, and a wireless set with a USB receiver depends on the device and port. A device on the computer’s built-in Bluetooth has nothing to plug in, and per a StarTech answer a webcam may work on a USB 3 port with no guarantee. Bluetooth devices switch on the device if they support multi-device pairing.

Some KVMs have two kinds of USB ports: dedicated keyboard and mouse ports, which present your devices as a basic keyboard and mouse, and ports that pass devices straight through. Multi-device pairing lets one device remember several computers and switch between them.

No document on USB microphones through a KVM turned up, so this guide treats them like a webcam. Nothing was tested on real units.

What a KVM can switch, device by device

Yes means it switches, depends means it varies by device and port type, and a dash means it does not go through the KVM. The port column assumes a KVM with both dedicated keyboard and mouse ports and pass-through ports.

Device Through a KVM Port to use If it fails
Wired: keyboard and mouse Yes Dedicated keyboard and mouse port If hotkeys fail on a pass-through port, replug into a dedicated port
Wired: gaming mouse with extra buttons or macros Depends on the device and port Pass-through port (extra features may not work on a dedicated port) If extra features fail, use a 3-button wired mouse as StarTech recommends
Wireless: USB receiver Depends on the device and port Dedicated keyboard and mouse port Move to a pass-through port; if that fails, go wired
Wireless: on the computer’s built-in Bluetooth — Does not go through the KVM Nothing to plug in (a USB Bluetooth adapter may not work) Switch with the device’s multi-device pairing if supported
Other USB device: webcam Depends on the device and port Pass-through port If not detected, plug it into the computer
Other USB device: microphone or audio device Depends on the device and port Pass-through port If it fails, plug it into the computer

If your KVM’s port types are different, pick the device and the port type in the tool below.

What a KVM can switch

Pick the device and your KVM's USB port type (dedicated keyboard and mouse ports, or ports that pass devices through) to see whether it switches, which port to use, and a pick. Verdicts summarize the makers' descriptions; nothing was tested on real units.

The two kinds of KVM USB ports

The difference: a dedicated port presents your devices as a basic keyboard and mouse, while a pass-through port hands the device to the computer as is. Below, dedicated keyboard and mouse ports are called dedicated ports. Port names in manuals (hub, pass-through and so on) and counts vary by model.

Wired, gaming and receiver-based wireless devices

A wired keyboard and mouse switch when plugged into the KVM’s USB ports; use the dedicated ports if there are any. StarTech’s manual says a keyboard on a USB hub port, that is, a pass-through port, loses hotkeys. Then switch with the KVM’s button or similar.

Extra buttons and macros on a gaming mouse may not work on a dedicated port. StarTech’s manual and ATEN’s FAQ both say the extra features of gaming devices or special mouse features may not work through a KVM. A pass-through port is worth trying, but whether mouse settings software works through a KVM was not researched.

A wireless set with a USB receiver can plug the receiver into the KVM, but it may not work. Saying most wireless devices do not support KVMs, StarTech’s manual says to move the receiver to a pass-through port, and if that fails, go wired. Hotkeys also stop working on that port.

Logitech lists KVMs, USB hubs and docks as unsupported for its own wireless products. For Logi Bolt, its wireless receiver standard, it says to plug the receiver straight into the computer. A receiver plugged into the computer is not switched by the KVM.

Bluetooth devices and multi-device pairing

A keyboard or mouse connected through the computer’s built-in Bluetooth connects straight to the computer, so there is nothing to plug into the KVM. A KVM switches what is plugged into its USB ports, so it does not switch these devices.

You could plug a USB Bluetooth adapter into the KVM, but no manual says that works. TESmart’s HKS201-M24 page lists Bluetooth keyboards and mice as unsupported.

Multi-device pairing switches the keyboard and mouse without a KVM. It does not switch the monitor’s picture, though, so to share one monitor, change its input with the monitor’s button or use a KVM.

Per Logitech, a keyboard with Easy-Switch, its multi-device pairing feature, switches among up to 3 computers with a short press of a button.

Webcams and USB microphones

Try a webcam on a pass-through port, not a dedicated one. A StarTech support answer says it may work on the KVM’s USB 3 port, with no guarantee.

Logitech support says that if a webcam is not detected, avoid hubs and docks and also try a USB 2.0 port. That advice is not about KVMs.

A USB 3.x port is faster than a USB 2.0 port on paper. No official source turned up on how much speed a webcam or microphone needs, and it was not researched.

On a KVM with only dedicated keyboard and mouse ports, a webcam or microphone has to go into the computer, so the KVM does not switch it.

No document on USB microphones or audio devices through a KVM turned up (checked October 28, 2026). This article treats them like a webcam: plug them into a pass-through port.

If it doesn’t work: the order to try

If a keyboard, mouse or receiver does not work, try the ports in this order. A webcam or microphone goes in a pass-through port from the start. This order is this guide’s own, based on StarTech’s manual.

  1. Plug it into a dedicated keyboard and mouse port.
  2. If that fails, move it to a pass-through port.
  3. If that still fails, go wired or plug it into the computer directly.

TESmart’s blog says a receiver on a pass-through port may be detected again at each switch, one reason the mouse may drop at step 2. Why it may lag was not researched.

Picks by situation

For two HDMI computers with just a keyboard and mouse, the TESmart HKS201-P23 is the pick. For two USB-C laptops with DisplayPort Alt Mode that also need a webcam or microphone, it is the Cable Matters USB-C KVM (201478).

Each pick is the cheapest listing that meets its condition, among Amazon.com listings checked on October 28, 2026. Slots are split by video connector and USB port count. A listing under 100 ratings was allowed if sold new by the maker with a matching model number and 4+ stars.

  • For two HDMI computers with just a keyboard and mouse: TESmart HKS201-P23

The TESmart HKS201-P23 switches two HDMI computers to one monitor, up to 3840×2160 at 60Hz per TESmart. The keyboard and mouse go in dedicated ports, and shared USB 3.0 (up to 5 Gbps) takes other devices. Each computer connects by HDMI plus USB through the included KVM cables, and the KVM needs its 12V adapter.

Its shared USB 3.0 port is where to try a webcam, with no guarantee per a StarTech answer, and whether one works on this model was not confirmed. TESmart’s page does not give the USB plug type, and Amazon lists it as HKS201-P23 without “V2”, so which version it is was not confirmed. The next pick is for USB-C laptops.

※ Sold by TESmart. It has only 68 ratings so far.

  • For two USB-C laptops with DisplayPort Alt Mode that also need ports for a webcam or mic: Cable Matters USB-C KVM (201478)

The Cable Matters USB-C KVM (201478) switches two USB-C laptops to one HDMI monitor. Cable Matters lists four 10 Gbps ports for SSDs, webcams and capture devices, plus 2 USB 2.0 ports. Both laptops need a USB-C or Thunderbolt port with DisplayPort Alt Mode, and the 180W adapter is included.

Per Cable Matters, it charges up to 100W for one laptop, or up to 85W each when both are connected. Whether a webcam or microphone works on this model was not confirmed.

※ Sold by Cable Matters. It has only 16 ratings so far.

FAQ

Does a wireless keyboard and mouse work through a KVM?

Going by manuals as of October 2026, a USB receiver set is worth trying, but a device on the computer’s built-in Bluetooth is not switched by a KVM. Plug the receiver into a dedicated keyboard and mouse port; if it fails, move it to a pass-through port or go wired.

Logitech says to plug a Logi Bolt receiver straight into the computer, where the KVM does not switch it. Nothing was tested on real units.

Can a KVM switch Bluetooth keyboards and mice?

A device on the computer’s built-in Bluetooth does not go through the KVM’s USB ports, so going by makers’ manuals, the KVM does not switch it. If it supports multi-device pairing, switch with its own button.

No manual says a USB Bluetooth adapter plugged into the KVM works, and one maker lists Bluetooth keyboards and mice as unsupported.

Can I plug a webcam into a KVM?

A StarTech support answer says a webcam may work on a USB 3 port, with no guarantee. On a KVM with only dedicated keyboard and mouse ports, plug the webcam into the computer; the KVM will not switch it.

Do gaming mouse macros work through a KVM?

Manuals say extra buttons and macros may not work on a dedicated keyboard and mouse port. A pass-through port is worth trying.

StarTech’s manual says hotkeys stop working when the keyboard or receiver is on that port. Whether mouse settings software works through a KVM was not researched.

Do KVM hotkeys work with wireless devices?

On a KVM with hotkeys, they can work if the receiver works in a dedicated keyboard and mouse port. StarTech’s manual says hotkeys stop working once the receiver moves to a pass-through port.

Some KVMs have no hotkeys; then switch with the KVM’s button or similar.

Data and formulas used (for verification)

Method

  • Covers Amazon.com listings and manufacturer specifications checked on 2026-10-28; items not found are marked as not found. Nothing was tested on real devices.
  • Device verdicts are this article’s summary of StarTech’s KVM manual (wireless and gaming devices, hub ports and hotkeys), ATEN’s FAQ (mouse emulation), TESmart’s blog (Bluetooth, receivers re-detected), Logitech support (KVMs and hubs unsupported, Easy-Switch, webcams) and a StarTech staff answer (webcams on a USB 3 port). Each maker describes its own products, not every KVM.
  • A KVM’s USB ports are split into dedicated keyboard and mouse ports (emulation) and ports that pass devices through (hub or pass-through), and each verdict covers four cases: both kinds, all the same ports, dedicated ports only, or unknown.
  • The keyboard and mouse are assumed to take 1 to 2 USB ports; picks are sized for 2. A webcam or USB microphone adds one more port and USB 3.x (5 Gbps or more). USB speeds are USB-IF signaling rates; how much bandwidth a webcam or microphone needs was not researched (no official source found).
  • The picks TESmart HKS201-P23 (68 ratings) and Cable Matters 201478 (16 ratings) are under 100 ratings; each was allowed because it is sold new, the listing matches the model number, and it has 4+ stars. The Amazon.com listing for the TESmart does not say “V2”, and which version it is was not confirmed. Cable Matters 201478 needs a USB-C port with DisplayPort Alt Mode on both computers.

Assumptions

  • USB ports the keyboard and mouse take: 2 for two cables or two receivers, 1 for a combo sharing one receiver. The picks are sized for 2 (this article’s assumption): 2 (1–2)
  • Extra USB port for a webcam or USB microphone: at least one (this article’s assumption).
  • Picks are KVMs for one monitor; dual-monitor KVMs are outside the slots.

Official values used

Item Value Source Checked
KVM vs USB switch (does video pass through) A KVM switches one keyboard, monitor and mouse among several computers and also switches the monitor’s picture (some models also share USB devices). A USB switch (a shared switch for USB peripherals) switches only USB devices and stays out of the video path. A KVM adds one more device between the GPU and the monitor (per ATEN and TESmart). aten.com ATEN explainer: “The main function of a KVM switch is to control, switch between 2026-10-28
KVM keyboard/mouse (emulated) ports: limits A KVM’s dedicated keyboard and mouse ports present a basic keyboard and mouse to the computer (emulation), so special features such as extra buttons and macros may not work. StarTech’s manual says gaming and combination mice and keyboards have extra functions that many KVMs do not support and that may affect KVM operation, and it recommends a 3-button wired mouse and a 104-key wired keyboard. ATEN’s FAQ also says that with mouse emulation on, special mouse features may not be compatible. sgcdn.startech.com StarTech manual: “Gaming mice and keyboards and combination mice and keyboards h 2026-10-28
KVM USB hub ports vs hotkeys and vendor software StarTech’s manual says hotkeys are not available if the keyboard is plugged into a USB hub port, and describes the hub ports as ports for sharing peripherals along with the computer switching. TESmart’s blog says a regular shared USB port behaves more like a switched USB hub, and that a receiver may disconnect from one computer and be detected again on the other at a switch. sgcdn.startech.com StarTech manual: “Hotkey commands aren’t available if your keyboard is plugged i 2026-10-28
Wireless (receiver) devices and KVM StarTech’s manual says some wireless mice and keyboards do work with KVM switches but most do not, and suggests moving the receiver to a USB hub port and, if that fails, going wired (hotkeys then stop working). Logitech does not support third-party devices such as KVM switches, USB hubs and docks with its products because they can interfere with communication, and says to plug a Logi Bolt receiver directly into the computer. sgcdn.startech.com StarTech manual: “Some wireless mice and keyboards do work with KVM switches, bu 2026-10-28
Bluetooth devices bypass the KVM TESmart’s blog says Bluetooth pairs the keyboard and mouse directly with each computer, bypassing the KVM’s USB path, so switching is done on the device or in the operating system. Logitech says a keyboard with Easy-Switch can be paired with up to three computers and switched between them. tesmart.com TESmart blog: “Bluetooth switching usually has to be performed on the peripheral 2026-10-28
Logitech Easy-Switch multi-pairing Per Logitech, a keyboard with Easy-Switch can be paired with up to 3 computers, and a short press of the Easy-Switch button changes the channel. Enhanced Easy-Switch lets the mouse follow a supported keyboard automatically; it needs Logi Options+ running on every computer you switch among, and a Bluetooth or Logi Bolt connection (Unifying and wired are not supported). support.logi.com Logitech support: “Once paired, a short press on the Easy-Switch button will all 2026-10-28
USB 2.0 vs USB 3.x speeds Per USB-IF, USB 2.0 hi-speed is 480 Mb/s. USB 3.2 has 5 Gbps, 10 Gbps and 20 Gbps transfer rates, and products are labeled by transfer rate, such as USB 5Gbps or USB 10Gbps. These are signaling rates; real speeds are lower. usb.org USB-IF FAQ: “The new hi-speed data transfer rate is 480 Mb/s.” 2026-10-28
Webcams and USB devices via KVM/hubs Logitech support says that when a webcam is not detected, check that it is not connected to a USB hub or docking station, and if it is on a USB 3.0 port, try a USB 2.0 port (it does not mention KVMs). A StarTech staff answer says connecting the webcam to one of the KVM’s USB 3 ports instead of the HID (keyboard and mouse) ports might work, with no guarantee. support.logi.com Logitech support: “Make sure the camera isn’t connected to a USB hub or docking 2026-10-28

What a KVM can switch: quick reference

The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.

Settings Result Calculator
Wired keyboard and mouse, Dedicated and pass-through ✓ Switches (dedicated port). Use the dedicated ports; hotkeys work there Open with these settings
Wired keyboard and mouse, Not sure ✓ Switches (check the manual). It switches on the USB ports; use dedicated ports if there are any Open with these settings
Gaming mouse (buttons, macros), Dedicated and pass-through △ Depends (pass-through port). Try a pass-through port; extra buttons depend on the device. StarTech and ATEN say special features may not work on dedicated ports. StarTech’s manual says hotkeys do not work when the keyboard or receiver is on a pass-through port Open with these settings
Gaming mouse (buttons, macros), Dedicated keyboard/mouse only △ Depends (dedicated port). Extra buttons and macros may not work on a dedicated port. StarTech and ATEN say special features may not work on dedicated ports Open with these settings
Wireless with USB receiver, Dedicated and pass-through △ Depends (dedicated, then pass-through). Plug the receiver into a dedicated port; if it fails, move it to a pass-through port. Logitech lists KVMs and USB hubs as unsupported for its own wireless products and says to plug a Logi Bolt receiver into the computer (then the KVM does not switch it). TESmart’s blog says a receiver on a shared port may be detected again at each switch. StarTech’s manual says hotkeys do not work when the keyboard or receiver is on a pass-through port. If it fails, try a dedicated port, then a pass-through port, then wired or a direct connection Open with these settings
Wireless with USB receiver, Dedicated keyboard/mouse only △ Depends (dedicated port). Plug the receiver into a dedicated port; if it fails, go wired. Logitech lists KVMs and USB hubs as unsupported for its own wireless products and says to plug a Logi Bolt receiver into the computer (then the KVM does not switch it) Open with these settings
On the computer’s built-in Bluetooth — Not via the KVM (use the device). Devices on the computer’s built-in Bluetooth have nothing to plug in, so switch them with multi-device pairing if supported (Logitech’s Easy-Switch multi-device pairing: up to 3). A wired set switches through the KVM; a receiver set depends on the device and port type, and a USB Bluetooth adapter may not work since TESmart’s HKS201-M24 page lists Bluetooth keyboards and mice as unsupported Open with these settings
USB webcam, Dedicated and pass-through △ Depends (pass-through port). Plug it into a pass-through port; nothing is guaranteed. The USB speed it needs was not researched, so try it first Open with these settings
USB webcam, All the same USB ports △ Depends (pass-through port). Plug it into a pass-through port; nothing is guaranteed. The USB speed it needs was not researched, so try it first Open with these settings
USB webcam, Dedicated keyboard/mouse only ✕ No port for it. Only dedicated ports, so plug it into the computer; the KVM will not switch it Open with these settings
USB webcam, Not sure △ Depends (check the manual). Check the manual for a pass-through port. The USB speed it needs was not researched, so try it first Open with these settings
USB mic or audio, Dedicated and pass-through △ Depends (pass-through port). Plug it into a pass-through port; nothing is guaranteed. The USB speed it needs was not researched, so try it first Open with these settings
USB mic or audio, Dedicated keyboard/mouse only ✕ No port for it. Only dedicated ports, so plug it into the computer; the KVM will not switch it Open with these settings