Contents17

In this guide’s reading, to view only at home, Bluetooth is enough. To view from away, use a Wi-Fi sensor or a Bluetooth sensor plus a hub. For several rooms from away, a hub fits best.

For one room from away, one Wi-Fi sensor is enough. For 3 rooms, use one hub with a built-in sensor plus a Bluetooth sensor in each of the other 2 rooms, 3 devices in all. The US pages confirm the Hub 2 with SwitchBot’s Indoor/Outdoor Thermo-Hygrometer, not with the Meter, and the room count is only an example.

What you need by where you look and how many rooms

This compares viewing readings on a phone. A Bluetooth-only sensor is read within Bluetooth range, and the SwitchBot Meter needs a hub for phone notifications.

Devices are counted as sensors plus one hub, this guide’s tally. A hub with a built-in sensor also counts as a sensor, so 3 rooms is 3 devices; a hub with no sensor would make it 4.

Where and how many rooms What you need Devices (this guide’s count)
At home only, 1 room A Bluetooth sensor (no hub) 1
At home only, 3 rooms A Bluetooth sensor per room (no hub; check that the signal reaches each spot) 3
From away, 1 room One Wi-Fi sensor, or one hub with a built-in sensor 1 (2 if the hub has no sensor)
From away, 3 rooms One hub with a built-in sensor, plus a Bluetooth sensor in each other room 3 (1 hub + 2 sensors)

Which sensor setup do I need?

Pick where you'll check the readings and how many rooms. It shows whether Bluetooth is enough or you need a Wi-Fi sensor or a hub, how many devices, and a matching pick.

Before you pick a sensor for each room, check that the signal reaches the spot where it will sit.

On major makers’ official pages as of October 2026, a Bluetooth-only sensor is read from a phone within Bluetooth range. SwitchBot says a Meter without a hub can be viewed only within that range, and no remote-viewing route was found for the Govee H5075 or ThermoPro TP357.

In the sources checked, SwitchBot lists 120 m / 394 ft. The Govee H5075 lists 50 m / 164 ft and the ThermoPro TP357 80 m / 260 ft, all with no obstacles. No figure for walls, doors or floors was found in the official pages checked.

Viewing from away: Wi-Fi sensor or hub

A hub is needed only when you want to view from away and the sensor cannot join Wi-Fi itself. For viewing at home, no hub is needed, and for one room from away a Wi-Fi sensor works without one.

There are two ways to view from away:

  • A Wi-Fi sensor joins Wi-Fi itself, so it can be viewed from away without a hub
  • A hub (some makers call it a gateway) relays the sensor’s readings to the internet over Wi-Fi. SwitchBot’s Meter series and Tapo’s T310 and T315 are described as needing one to be viewed from away

In the sources checked, the Govee H5179 and SwitchBot’s hub with a built-in sensor support 2.4GHz only, so a 5GHz-only router will not work with them. The bands of other models were not checked.

Why a hub suits several rooms

In this guide’s reading, for several rooms viewed from away, a hub fits best. Each Wi-Fi sensor joins Wi-Fi on its own, while with a hub only the hub does. With 3 rooms, a hub with a built-in sensor covers one room, and each other room needs a Bluetooth sensor, 3 devices in all.

On major makers’ official pages, one hub can serve several sensors, so you do not need one in every room. SwitchBot says its Hub 3 manages up to 15 Bluetooth devices, remotes included. The Hub 2 figure was not confirmed.

Battery, records and accuracy by model

The table puts each model’s figures side by side.

Model Published battery History / CSV Temperature accuracy Humidity accuracy
SwitchBot Meter about 2 years up to 2 years in the cloud with a hub; CSV about ±0.2 °C (±0.36 °F) ±1.8 %RH
Tapo T310 / T315 not confirmed most recent 2 calendar years; CSV ±0.3 °C (±0.54 °F) ±3 %RH
Govee H5179 about 7 months 20 days in the app, up to 2 years; CSV ±0.3 °C (±0.54 °F) ±3 %RH
SwitchBot hub with built-in sensor USB powered not confirmed ±0.36 °F (about ±0.2 °C) ±1.8 %RH

Battery life

In the sources checked, the Bluetooth-only SwitchBot Meter lists about 2 years of battery, the Meter Pro about 1 year and the Govee H5075 about 6 months. The Wi-Fi Govee H5179 lists about 7 months, longer than the H5075. The SwitchBot hub with a built-in sensor is USB powered, and published figures are maximums.

Records while the internet is down

On major makers’ official pages, what is recorded when the internet is down differs by model, and no official Govee page was found. SwitchBot lists 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. Tapo says a hub offline for about 24 hours or more may lose earlier data.

Temperature and humidity accuracy

Humidity accuracy differs by model, from ±1.8 to ±3 %RH on the official pages. The SwitchBot Meter Pro and Govee models can be calibrated in the app; no calibration is described for Tapo, whose accuracy is from its Japanese page. Accuracy is per model, not set by Wi-Fi or Bluetooth.

What is sold in the US

The picks were chosen from Amazon.com listings checked on October 17, 2026.

Picks by situation

At home only, a Bluetooth sensor is the pick. For one room from away, a Wi-Fi sensor. For several rooms from away, a hub.

On Amazon.com listings checked on October 17, 2026 (ZIP 10001), a Wi-Fi sensor that needs no hub meets the criteria, and so does a hub with a built-in sensor.

Each pick is the cheapest new listing, shipping included. It has 100 or more ratings and 4.0 or more stars, and is sold by Amazon.com or a seller named for the brand.

Check the price on each store page.

  • Viewing only at home: SwitchBot Meter (Bluetooth)

A single Bluetooth sensor that SwitchBot’s Japan page says can be viewed from away once a hub is added. Its published battery life is up to about 2 years, so it can start at home and gain a hub later.

Sold by SwitchBot US.

  • One room from away: GoveeLife Wi-Fi Thermo-Hygrometer H5179

A Wi-Fi sensor that needs no hub, for one room viewed from away. Alerts are set over Bluetooth and it supports 2.4GHz Wi-Fi only. The app shows 20 days of history, and no official page states how many days it stores on the device.

Sold by GoveeLife US Direct.

Several rooms from away

SwitchBot’s US page for its Indoor/Outdoor Thermo-Hygrometer says the Hub 2, which has a built-in sensor, can show that sensor’s readings and sound an alert. That page was a search summary, and the Hub 2 US page was not checked for the Meter itself. How many sensors the Hub 2 takes was not confirmed.

Amazon sometimes pools ratings across similar models. None of the three picks looks pooled, but that is not confirmed.

FAQ

Do Wi-Fi hygrometers drain batteries faster?

In the sources checked, the official figures do not show that Wi-Fi drains batteries faster. Published life is per model: one Bluetooth-only model is listed at about 6 months and the Wi-Fi model checked at about 7 months.

These are maximums, and no like-for-like comparison was found.

Does a Wi-Fi hygrometer work on 5GHz?

The Wi-Fi models checked support 2.4GHz only, so check that your router offers 2.4GHz before buying.

Do hygrometer alerts reach me if the app is closed?

Alerts for readings outside a range are set in the app, and some Bluetooth sensors need a hub for phone notifications. Whether alerts arrive with the app closed, and how often, was not confirmed on the official pages.

Is hygrometer data kept while the internet is down?

In the sources checked, what is recorded when the internet is down differs by model, and some state no number of days.

How many days of history does a hygrometer keep, and can I export CSV?

On major makers’ official pages as of October 2026, one maker stores up to 2 years in the cloud with a hub. Another keeps the most recent 2 calendar years, and a Wi-Fi model shows 20 days in the app.

All can export CSV.

Do smart hygrometers work with Alexa, Google and Matter?

Alexa, Google and Matter support was not compared across these models, so check each maker’s page before buying.

Data and formulas used (for verification)

How this was checked: Official pages were read in October 2026 and listings were checked on October 17, 2026 (stars and prices move daily), and nothing was tested on real devices. The SwitchBot support articles were read as search-result summaries, the Tapo pages are its US FAQ, and the Govee manual was read on a third-party site. No official figure was found for how well Bluetooth reaches through walls or between floors, and it was not tested.

Method

  • Covers current SwitchBot, Tapo (TP-Link), Govee and ThermoPro models on their official pages as of October 2026. SwitchBot’s support articles could not be fetched and some are read from search summaries; Tapo’s come from TP-Link’s US FAQ and the Govee manual from a third-party hosting site. Nothing was tested on real devices. The Hub 2 accuracy is from the SwitchBot US page; its 2.4GHz-only note and the Tapo accuracy are from the makers’ Japanese pages.
  • What is needed to view from away comes from each maker’s page: SwitchBot’s Meter series and Tapo’s T310 and T315 need a hub, the Govee H5179 connects over Wi-Fi directly, and the Govee H5075 is Bluetooth only with no stated remote-viewing route.
  • Bluetooth ranges are published maximums with no obstacles (SwitchBot 120 m, Govee H5075 50 m, ThermoPro TP357 80 m). No figure for walls, doors or floors was found in the official pages checked.
  • Battery life is each model’s published maximum; it is not compared across a whole connection type. The guide lists Bluetooth-only and Wi-Fi models side by side in days. The US page and the manual for the Govee H5179 disagree on the AA battery count, so the count is not stated.
  • The number of rooms (1-6, typical 3) and the length of an absence (3-30 days) are assumptions. Device counts are this guide’s tally of sensors plus one hub, where a hub with a built-in sensor counts as a sensor. SwitchBot says its Hub 3 manages up to 15 Bluetooth devices; the Hub 2 figure was not confirmed.
  • On-device storage when the internet is down: SwitchBot lists 36 days for the Meter and 68 days for the Meter Plus, Meter Pro and Outdoor Meter; the Meter’s US page says 68, so the shorter 36 is used. Tapo says a hub offline for about 24 hours or more may lose earlier data. No official Govee page was found.
  • Picks come from the Amazon.com listings checked on October 17, 2026 (delivery to New York 10001): 100+ ratings, 4.0+ stars, sold by Amazon.com or a seller named for the brand, new. One cheapest pick per condition, shipping included. Hub-plus-sensor sets are used only when the listing’s contents are confirmed. Listings with identical rating counts may share them (an observation, not confirmed).

Assumptions

  • How many rooms you want to watch (assumed): 1 to 6. The table uses 3 as its typical value.: 3 (1–6)
  • Length of an absence (assumed): 3 to 30 days. Comparison with on-device storage uses the longest, 30 days.: 14 (3–30)

Official values used

Item Value Source Checked
epa_humidity_30_50 EPA: if possible, keep indoor relative humidity below 60 percent (ideally 30-50 percent); it can be measured with a small, inexpensive ($10-$50) humidity meter. epa.gov If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 pe 2026-10-17
cdc_humidity_50 CDC: keep humidity in the home as low as you can, no higher than 50%, all day long; humidity changes over the course of a day, so check more than once a day; consider not using carpet in places like bathrooms or basements. cdc.gov Keep humidity levels in your home as low as you can–no higher than 50%–all day 2026-10-17
epa_basement_condensation EPA: damp basements promote biological growth including molds; uninsulated concrete slabs are often colder than the basement air, so moisture can condense on the slab and promote mold growth in carpet; the basement should be part of the home’s ventilation strategy. epa.gov Because damp basements promote biological growth, including molds, they are not 2026-10-17
epa_condensation_cold_surface EPA: high humidity (60% RH) is a common moisture problem; when warm, humid air contacts a cold surface, condensation may form; mold is frequently found on walls in cold corners behind furniture. epa.gov When warm, humid air contacts a cold surface, condensation may form. / Mold is f 2026-10-17
taylor_humidity_45_55 Taylor: optimal range is 45-55% RH; a digital hygrometer is the only way to be certain you’re in range; guitars are built at 46% RH; the Wood & Steel guide gives the same 45-55%. taylorguitars.com Taylor’s stated optimal range for your guitar is “45-55% RH.” / a digital hygrom 2026-10-17
martin_humidity_45_55 Martin recommends maintaining your guitar at a relative humidity level of 45-55% and a temperature between 72-77°F (22-25°C); a room or case humidifier can help, particularly in colder months. martinguitar.com We recommend maintaining your guitar at a relative humidity level of 45–55% and 2026-10-17
yamaha_humidity_45_55 (Yamaha Japan) Storage humidity of 45-55% is best (search excerpt); Yamaha US FAQ also says 45-55% (page body not retrievable). yamaha.com 2026-10-17
switchbot_meter_remote_needs_hub SwitchBot says Meter-series sensors can only be viewed within Bluetooth range without a hub; remote viewing and phone push notifications need a SwitchBot hub. switchbot.jp 2026-10-17
switchbot_meter_cloud_history_2y SwitchBot states up to two years of data can be stored in the cloud when a Meter is used with a hub (the US product page also says unlimited cloud storage). support.switch-bot.com 2026-10-17
switchbot_meter_onboard_days Official on-board storage: 68 days for Meter Plus, Outdoor Meter and Meter Pro; 36 days for Meter and Meter Pro CO2 per support article (the US Meter product page says 68 days). support.switch-bot.com 2026-10-17
switchbot_meter_export_csv SwitchBot says Meter-series data can be exported as CSV from the app. switch-bot.com Data exportable as CSV. 2026-10-17
switchbot_meter_pro_bt_range SwitchBot lists Meter Pro Bluetooth range as up to 120 m in open space with no obstacles. switchbot.jp 2026-10-17
switchbot_meter_bt_range_394ft SwitchBot US pages list Meter/Meter Plus at 394 ft (~120 m); the Outdoor page adds ‘no obstacles’. switch-bot.com View temperature and humidity data from 394ft away. 2026-10-17
switchbot_meter_pro_calibration SwitchBot says Meter Pro can be calibrated in the app (Settings → Calibration), temperature and humidity separately, and warns that calibrating to an inaccurate reference can be worse than not calibrating. support.switch-bot.com 2026-10-17
switchbot_hub2_wifi_24ghz SwitchBot Hub 2 supports 2.4 GHz Wi-Fi only (no 5 GHz). switchbot.jp 2026-10-17
switchbot_hub3_bluetooth_devices SwitchBot says the universal remote hubs manage up to 15 Bluetooth devices (12 SwitchBot devices + 3 Bluetooth remotes). support.switch-bot.com 2026-10-17
switchbot_hub2_sensor_accuracy SwitchBot Hub 2 accuracy is shown as +/-1.8% RH / 0.36 F on the US page and +/-0.2 C (0-65 C), +/-2% RH (10-90%) in Japanese material. switch-bot.com accuracy up to ±1.8% RH/±0.36°F 2026-10-17
aqara_t1_hub_required Aqara T1 is Zigbee 3.0 and cannot connect to a phone directly; an Aqara hub is required. Aqara does not list compatible hub models. aqara.com cannot be connected to the mobile phone directly. 2026-10-17
aqara_t1_zigbee_range Aqara lists T1 response distance to the hub as about 10 m indoors (walls allowed) and about 65 m outdoors. aqara.com Indoor responsive distance is about 10 m (32.81 ft) (walls are permissible). 2026-10-17
aqara_t1_alert Aqara T1 pushes a phone notification when conditions leave the comfort zone (can be disabled). aqara.com it will push notifications to the mobile phone. This function can be disabled in 2026-10-17
eve_weather_home_hub Eve Weather requires an Apple TV 4K (2nd/3rd gen 128 GB), HomePod (2nd gen) or HomePod mini as home hub. evehome.com Apple TV 4K (2nd gen / 3rd gen 128 GB), HomePod (2nd gen), or HomePod mini as a 2026-10-17
eve_room_home_hub Eve says controlling Eve Room away from home requires a HomePod or Apple TV (4th gen or later) as home hub. evehome.com 2026-10-17
govee_h5075_remote_bt_only Govee H5075 supports Bluetooth only, no Wi-Fi. Govee’s page does not say a gateway is needed or supported for remote viewing. us.govee.com No. The product only supports Bluetooth connection. 2026-10-17
govee_h5179_wifi_direct Govee H5179 connects over 2.4GHz Wi-Fi without a gateway; 5GHz is not supported. us.govee.com No. It only works with 2.4GHz Wi-Fi. 2026-10-17
govee_h5100_h5151_gateway Govee H5100 is a Bluetooth sensor; paired with the H5151 gateway it becomes a Wi-Fi sensor, up to 10 sensors per gateway (Japan page). govee-japan.com 2026-10-17
govee_3lite_gateway_required_for_alerts Govee’s 3 Lite page says app alerts require the Wi-Fi gateway + sensors version; the gateway is not sold alone and pairs with up to 30 sensors. us.govee.com please must purchase a Wi-Fi gateway+sensors version, wifi gateway is not sold a 2026-10-17
govee_h5179_history_20d_2y Govee H5179 page: 20 days of online storage to view and export, up to 2 years of data. us.govee.com Enjoy 20 days of online data storage view and export up to 2 years’ worth of dat 2026-10-17
govee_export_csv_email Govee exports history as CSV to your mailbox (account login required for H5075; email address entered for H5179). manualslib.tech Send historical data to your mailbox in CSV format. 2026-10-17
govee_h5075_bt_range Govee H5075 Bluetooth range: manual says 50m with no obstacles; US page lists both 60m and 50m (open, unobstructed). No official 80m figure found. manualslib.tech 50m/164ft (NO obstacles) 2026-10-17
govee_h5179_bt_wifi_range Govee H5179: Bluetooth 30m and Wi-Fi 50m, both with no obstructions. manualslib.tech 30m/49ft (no obstructions) / Wi-Fi range 50m/98ft (no obstructions) 2026-10-17
govee_h5075_calibration Govee H5075 calibration range per manual: 3°C for temperature, 20.0% for humidity. manualslib.tech Calibration range for the temperature is 3ºC/5.4ºF while for the humidity is 20. 2026-10-17
govee_alert_conditions Govee sends push alerts when readings leave the preset range; no frequency limit documented. For H5179, delayed alerts are attributed to Wi-Fi stability. manualslib.tech Cannot receive alerts / alerts delayed: Make sure Wi-Fi signal is stable. 2026-10-17
govee_onboard_log_unconfirmed No official Govee page or manual found that documents onboard storage days or sync after reconnecting. us.govee.com 2026-10-17
govee_h5179_goveelife_migration Search summary says Govee UK/CA/US H5179 pages carry a notice about moving appliances to GoveeLife sites; no explicit model discontinuation. uk.govee.com 2026-10-17
inkbird_th2plus_onboard_bt Inkbird IBS-TH2 Plus stores up to 30,000 points on the device; Bluetooth 98ft without obstacles; remote use needs a gateway such as IBS-M2. inkbird.com stores a maximum of 30,000 points of data on the device. 2026-10-17
inkbird_m2_gateway Inkbird IBS-M2: 2.4GHz Wi-Fi, up to 9 Bluetooth sensors, 1-year history, alarm notifications, 164ft Bluetooth without interference. inkbird.com Maximum Number of Devices Supported: 9 2026-10-17
inkbird_th3plus_history_csv Inkbird IBS-TH3 WIFI PLUS: Wi-Fi direct (2.4GHz), 1-year history, CSV export, calibration ±10, rechargeable ~3 months at 60-min interval. inkbird.com View historical data of the past year. 2026-10-17
thermopro_tp357_bt_range ThermoPro TP357 rated Bluetooth range is 260 ft (80 m) in open space with no obstructions or interference. temppro.com stable, reliable range of up to 260 feet (80 meters) in open spaces. 2026-10-17
thermopro_tp357_history_1y ThermoPro TP357 shows 1 year of history; 2-year exportable data is attributed to TP350/TP358. temppro.com 1-year data storage with an easy-to-use graph feature. 2026-10-17
thermopro_tp371_wifi_remote ThermoPro TP371: 2.4GHz Wi-Fi + Bluetooth, no gateway, remote over internet, up to 2 years exportable CSV; shown sold out. temppro.com Remote Range: No distance limit over Wi-Fi. 2026-10-17
tapo_t31x_remote_needs_hub Tapo T310/T315 need a Tapo hub for remote monitoring, automation and data storage; T315 works as a standalone thermometer without a hub tapo.com 2026-10-17
tapo_t31x_history_2years Tapo sensors retain history for the most recent 2 calendar years; export to CSV via email from the app tp-link.com The sensor retains historical data from the most recent 2 calendar years. 2026-10-17
tapo_hub_offline_data Tapo: if the hub is offline more than ~24 hours earlier data may be lost; rebooting the hub deletes unuploaded history; power-outage data is lost tp-link.com If the hub remains offline for more than about 24 hours, it may lose earlier dat 2026-10-17
tapo_hub_history_delete Tapo: removing the sensor or hub from the app deletes history permanently; H100 10-second factory reset deletes it, 5-second soft reset keeps it tp-link.com Deleted historical data cannot be recovered. 2026-10-17
tapo_h100_device_count Tapo H100 connects up to 64 devices (varies by type); Sub-1G only tapo.com 2026-10-17
tapo_t31x_frequency Japan Tapo T310/T315 use 922MHz; the EU manual lists 868MHz static.tp-link.com 868~868.6MHz / 868.35MHz / 25mW (e.r.p) 2026-10-17
tapo_t31x_accuracy Tapo T310/T315 accuracy ±0.3°C / ±3%RH tapo.com ±0.3℃ / ±3%RH 2026-10-17
daddario_humiditrak_discontinued D’Addario Humiditrak is discontinued; Blustream keeps supporting the app for existing users support.daddario.com the Humiditrak has been discontinued and is no longer available via our website 2026-10-17
daddario_humiditrak_battery Blustream FAQ: Humiditrak CR2032 lasts about 4-8 months; impact detection shortens it humiditrak.blustream.io The battery will last for approximately 4 to 8 months under typical conditions 2026-10-17
daddario_humiditrak_accuracy Humiditrak accuracy: humidity ±4% RH, temperature ±0.5°C (Blustream FAQ) humiditrak.blustream.io humidity ±4% RH, temperature ±0.5°C 2026-10-17
daddario_humiditrak_bt_range No official Bluetooth range for Humiditrak and no statement about a closed case; data uploads when back in range humiditrak.blustream.io Once you enter back into Bluetooth range of the sensor, the data will upload to 2026-10-17
daddario_hts_no_bluetooth D’Addario PW-HTS is a standalone display hygrometer with no Bluetooth mentioned, not a Humiditrak successor; 20-99% RH, CR2032 cdn.shopify.com Accurate Relative Humidity indicator (20% to 99%…) 2026-10-17
oasis_oh2plus_accuracy Oasis OH-2+: manual says ±2% at 20-80% RH (±3% at edges); product page says ±3% at 20-80% oasishumidifiers.com accurate to +/- 2% between 20-80% RH and +/- 3% between 10-20% RH and 80-90% RH 2026-10-17
oasis_oh2plus_calibration Oasis OH-2+ can be offset-calibrated ±6% with a Boveda one-step kit (32%/72%); said to be normally unnecessary oasishumidifiers.com The calibration feature is also included, but shouldn’t be necessary with the im 2026-10-17
boveda_butler_status Boveda Butler was replaced by CI Smart Sensor (Cigars International); Boveda has no current Bluetooth hygrometer of its own help.bovedainc.com The CI Smart Sensor replaced the Boveda Butler digital hygrometer. 2026-10-17
boveda_hygrometer_accuracy Boveda: even calibrated, hygrometers are generally within about ±3-5% RH help.bovedainc.com ±3–5% RH 2026-10-17
boveda_calibration_75 Boveda one-step calibration kit takes ~24 hours; reload with a 75% RH Size 8 pack help.bovedainc.com It takes just 24 hours for professional-level results. 2026-10-17
boveda_salt_test_caveat Boveda says a homemade salt test cannot give a precise RH value; it varies with salt-to-water ratio help.bovedainc.com You’ll never receive a precise relative humidity (RH) reading 2026-10-17
daddario_humidipak_rh D’Addario Humidipak Maintain holds 45-50% RH (an older article says 45-55%) daddario.com 2026-10-17
boveda_instrument_rh Boveda large instrument kit: maintains 40-60% RH (the industry standard for wooden instruments) store.bovedainc.com 2026-10-17
gibson_rh Gibson’s blog: ideal storage 40-60% RH gibson.com 2026-10-17
fender_rh Fender (Tacoma support article): 40-60% RH jp-support.fender.com 2026-10-17
musicnomad_rh MusicNomad: 40-55% RH and 70-78°F (21-26°C) musicnomadcare.com maintain an environment of 40%–55% relative humidity and a temperature between 7 2026-10-17
oasis_rh Oasis: wood is stable at 40-45% RH at ~70°F; humidify below 50% RH oasishumidifiers.com Guitars are generally made from aged wood that is stable at 40-45% humidity at a 2026-10-17
salt_75_nacl Saturated NaCl gives ~75.3% RH at 25°C (Greenspan); sealed chamber, ~24h equilibration; stated uncertainty 1.4% RH + Greenspan engineering.purdue.edu 2026-10-17
switchbot_hub2_relays_indoor_outdoor_us SwitchBot’s US page for its Indoor/Outdoor Thermo-Hygrometer says the Hub 2 screen can display that sensor’s temperature and humidity, with a flashing screen and sound alert (read as a search summary). The Hub 2 US page was not checked for the Meter itself. switch-bot.com 2026-10-17
switchbot_hub_mini_us_meter_unconfirmed The US SwitchBot Hub Mini page has no text on working with the Meter, and the US Hub Mini Matter page’s device list does not name the Meter series. switch-bot.com 2026-10-17

Which sensor setup do I need?: quick reference

The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.

Settings Result Calculator
At home only, 1 room ✓ A Bluetooth sensor is enough (no hub). You need: A Bluetooth sensor (no hub). Devices: 1. Published Bluetooth range is 50 to 120 m on the models checked (164 to 394 ft), with no obstacles; no figure for walls or floors was found, so test the spot you plan to use Open with these settings
At home only, 3 rooms ✓ A Bluetooth sensor is enough (no hub). You need: A Bluetooth sensor per room (no hub; check that the signal reaches each spot). Devices: 3. Published Bluetooth range is 50 to 120 m on the models checked (164 to 394 ft), with no obstacles; no figure for walls or floors was found, so test the spot you plan to use Open with these settings
From away, 1 room ✓ A Wi-Fi sensor, or a Bluetooth sensor plus a hub. You need: One Wi-Fi sensor, or one hub with a built-in sensor. Devices: 1 (2 if the hub has no sensor). A hub is needed only when you want to view from away and the sensor cannot join Wi-Fi itself. For viewing at home, no hub is needed, and for one room from away a Wi-Fi sensor works without one. The Wi-Fi models checked support 2.4GHz only, so check that your router offers 2.4GHz before buying Open with these settings
From away, 2 rooms ✓ One hub with a sensor in each room fits best. You need: One hub with a built-in sensor, plus a Bluetooth sensor in each other room. Devices: 2 (1 hub + 1 sensor). One hub can serve several sensors, so you do not need one in every room. SwitchBot says its Hub 3 manages up to 15 Bluetooth devices, remotes included. The Hub 2 figure was not confirmed. The Wi-Fi models checked support 2.4GHz only, so check that your router offers 2.4GHz before buying Open with these settings
From away, 3 rooms ✓ One hub with a sensor in each room fits best. You need: One hub with a built-in sensor, plus a Bluetooth sensor in each other room. Devices: 3 (1 hub + 2 sensors). One hub can serve several sensors, so you do not need one in every room. SwitchBot says its Hub 3 manages up to 15 Bluetooth devices, remotes included. The Hub 2 figure was not confirmed. The Wi-Fi models checked support 2.4GHz only, so check that your router offers 2.4GHz before buying Open with these settings
From away, 6 rooms ✓ One hub with a sensor in each room fits best. You need: One hub with a built-in sensor, plus a Bluetooth sensor in each other room. Devices: 6 (1 hub + 5 sensors). One hub can serve several sensors, so you do not need one in every room. SwitchBot says its Hub 3 manages up to 15 Bluetooth devices, remotes included. The Hub 2 figure was not confirmed. The Wi-Fi models checked support 2.4GHz only, so check that your router offers 2.4GHz before buying Open with these settings