Contents12
- Pick by one spot or several
- What lets you view from away
- What is recorded when the internet goes down
- How alerts arrive and which values to set
- History and battery life
- Picks by condition
- Already own SwitchBot Meter sensors and want to view from away
- FAQ
- Can a Bluetooth-only hygrometer be checked from away?
- Does a hygrometer keep its record if the internet goes down?
- What humidity should I set the alert to for an empty home? What about a pet?
- Are hygrometer readings accurate? Can I calibrate one?
On major makers’ official pages as of October 2026, viewing a room from away needs a sensor that connects over Wi-Fi directly, or a Bluetooth sensor plus a hub.
Pick by one spot or several
- To watch one spot, a Wi-Fi sensor is a single device, but its on-device record during an outage was not confirmed.
- To watch several rooms or outdoors, connect the sensors to a hub. On major makers’ official pages as of October 2026, one hub can serve several sensors, so you may not need one in every room. How many sensors each hub takes was not checked on the US pages, so no count is given.
- If you already own a compatible sensor, add a hub. SwitchBot’s Hub 2, which has a built-in sensor, is described as relaying the Meter series for remote viewing and alerts. The Hub 3 was not confirmed.
What lets you view from away
There are two ways.
- A Wi-Fi sensor: the sensor itself joins Wi-Fi, so it can be viewed from away without a hub
- A hub plus a Bluetooth sensor: a hub (some makers call it a gateway) relays the sensor’s readings to the internet over Wi-Fi. SwitchBot’s Meter series and Tapo’s T310 and T315 are described as needing a hub to be viewed from away
Bluetooth only: the sensor is read from a phone within Bluetooth range. SwitchBot says a Meter without a hub can be viewed only within that range. For the Govee H5075 and ThermoPro TP357, no remote-viewing route or gateway is described.
2.4GHz is the older Wi-Fi band. The Govee H5179 and SwitchBot’s hub with a built-in sensor support 2.4GHz only, so a 5GHz-only router will not work with them. The bands of other models were not checked.
SwitchBot lists a Bluetooth range of 120 m (394 ft) with no obstacles. The Govee H5075 lists 50 m (164 ft) and the ThermoPro TP357 lists 80 m, or 260 ft, also with no obstacles. No figure for walls or doors was found in the official pages checked.
No official page says whether a new router or a changed Wi-Fi password needs a re-setup, so check for 2.4GHz before swapping routers. Use of the apps abroad was not checked.
What is recorded when the internet goes down
The rows are assumed outage lengths. The SwitchBot column covers the Meter series only; the on-device record of the hub with a built-in sensor was not confirmed.
| How long the internet is down | SwitchBot Meter series on-device record | Tapo hub | Govee |
|---|---|---|---|
| 12 hours | Stays on the Meter series (up to 36 days) | Handling under 24 hours is not documented | Not documented |
| 3 days | Stays on the Meter series (up to 36 days) | Earlier data may be lost | Not documented |
| 30 days | Stays on the Meter series (up to 36 days) | Earlier data may be lost | Not documented |
| 40 days | Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days) | Earlier data may be lost | Not documented |
Does the record survive an internet outage?
Pick your hygrometer and enter how long the internet may be down. It shows whether the on-device record covers it, using the same lines as the table.
For these settings
For these settings
For these settings
The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns.
Assuming an absence of up to 30 days, that fits within the shortest on-device record of the SwitchBot Meter series, 36 days. How records are read back on return is not documented.
A hub offline for more than about 24 hours may lose earlier data, and handling under 24 hours is not described. Rebooting it deletes data not yet uploaded, and data from a power outage is lost.
No official Govee page or manual states how many days the device stores or whether it syncs after reconnecting.
How alerts arrive and which values to set
On major makers’ official pages, alerts for readings outside a range are set in the app, and Tapo notifies the app when readings leave it. SwitchBot’s Meter series needs a hub for phone notifications; without one, only on-device and in-app warnings work. The Govee H5179 lists alert settings as Bluetooth only, so changing them from away is unclear; the ThermoPro TP357 has no on-device alarm.
No official page checked says how often alerts repeat or whether they stack, or whether a low-battery notification exists.
On the EPA and CDC pages, the EPA says to keep indoor humidity below 60%, ideally 30-50%, and the CDC says no higher than 50%. For an empty home this guide sets the upper alert at 60%, or 50% on the CDC’s stricter line, and the lower alert at 30%. No source gives a target for an empty home.
History and battery life
The comparison covers the SwitchBot Meter series, Tapo’s temperature and humidity sensors and the Govee H5179.
On major makers’ official pages, SwitchBot stores up to 2 years in the cloud when used with a hub, and Tapo keeps the most recent 2 calendar years. The Govee H5179 shows 20 days in the app and lists up to 2 years. All can export CSV; Tapo and Govee send it by email.
No official page checked says whether the app shows history as a graph.
A 30-day absence is also shorter than the shortest published battery life of the SwitchBot Meter series (about 1 year). The published figure is a maximum, so check the batteries before you leave.
Picks by condition
For one room, the pick is GoveeLife Wi-Fi Thermo-Hygrometer H5179. To add sensors, the picks are SwitchBot Indoor/Outdoor Thermo-Hygrometer (Bluetooth) and the hub SwitchBot Hub 2.
The sensor pick comes from sensors whose on-device record is officially listed as 68 days, in case the hub drops offline. The Meter, at 36 days, is left out.
On Amazon.com listings checked on October 17, 2026 (ZIP 10001), a Wi-Fi sensor that needs no hub qualifies, and so does a hub with a built-in sensor.
The Tapo T310 and T315 do not state an on-device record in days, so they miss the sensor condition and are not picks. Inkbird’s Wi-Fi sensor is rated below 4.0 and sold by a third-party seller, and no ThermoPro Wi-Fi sensor was found.
Check the price on the store page.
- One device for one room: GoveeLife Wi-Fi Thermo-Hygrometer H5179
A Wi-Fi sensor that needs no hub, for a single room, with alerts set over Bluetooth and 2.4GHz Wi-Fi only. The app shows 20 days and lists up to 2 years of history. No official page states how many days it stores on the device or what happens when Wi-Fi drops.
Sold by GoveeLife US Direct.
- A sensor to pair with a hub: SwitchBot Indoor/Outdoor Thermo-Hygrometer (Bluetooth)
A Bluetooth sensor used with a hub. It is listed with 68 days of on-device record and about 2 years of battery. Whether it has a display was not confirmed, so plan on reading it in the app.
Sold by SwitchBot US.
Already own SwitchBot Meter sensors and want to view from away
A hub with its own built-in sensor and a screen. Added to Meter sensors, it relays their readings for viewing and alerts from away. On the listings checked it costs about 1.7 times the Hub Mini’s price, and its own history and CSV export were not confirmed.
Humidity accuracy and calibration for the picks.
| Pick | Humidity accuracy | Calibration in the app |
|---|---|---|
| SwitchBot Indoor/Outdoor Thermo-Hygrometer | ±1.8 %RH | Meter series can be calibrated in the app; this model not confirmed |
| GoveeLife Wi-Fi Thermo-Hygrometer H5179 | ±3 %RH (a third-party manual) | Yes, in the app (range not stated) |
| SwitchBot Hub 2 | ±1.8 %RH (US page) | Not confirmed |
Each pick is the cheapest new listing, shipping included. It has 100 or more ratings and 4.0 or more stars, and is sold by Amazon.com or a seller named for the brand.
Amazon sometimes pools ratings across similar models. One of the picks shows the same rating count as another listing and two were not checked, but none is confirmed as pooled.
FAQ
Can a Bluetooth-only hygrometer be checked from away?
A Bluetooth-only sensor can be read while your phone is within range. Viewing from away needs a Wi-Fi sensor, or a Bluetooth sensor plus a hub, and one maker says a sensor without a hub can be viewed only within Bluetooth range.
Does a hygrometer keep its record if the internet goes down?
When the internet is down, models differ: some state how many days they store, one may lose earlier data after about 24 hours offline, and some state nothing. One maker’s FAQ says a hub offline for more than about 24 hours may lose earlier data.
What humidity should I set the alert to for an empty home? What about a pet?
Set the humidity alert above 60% (or 50% on the CDC’s stricter line) and below 30%, as this guide reads the EPA and CDC pages. Those pages are not specific to an empty home, and pet thresholds were not researched from vets or pet-product makers.
Are hygrometer readings accurate? Can I calibrate one?
On major makers’ official pages as of October 2026, humidity accuracy differs by model, from ±1.8 to ±3 %RH. Some can be calibrated in the app and some list no calibration.
Data and formulas used (for verification)
How this was checked: Official pages were checked in October 2026, with SwitchBot’s support articles read as search summaries and Govee’s manual on a third-party site. Amazon.com listings were checked on October 17, 2026. Nothing was tested on real devices.
Method
- Covers current SwitchBot, Tapo (TP-Link), Govee and ThermoPro models on their official pages as of October 2026. SwitchBot’s support articles could not be fetched and some are read from search summaries; Tapo’s come from TP-Link’s US FAQ and the Govee manual from a third-party hosting site. Nothing was tested on real devices.
- What is needed to view from away comes from each maker’s page: SwitchBot (Meter series) and Tapo (T310, T315) need a hub, the Govee H5179 connects over Wi-Fi directly, and the Govee H5075 is Bluetooth only with no stated remote-viewing route.
- On-device storage when the internet is down: SwitchBot lists 36 days for the Meter and 68 days for the Meter Plus, Meter Pro and Outdoor Meter. The Meter’s US product page says 68, so the shorter 36 is used. Tapo says a hub offline for about 24 hours or more may lose earlier data. No official Govee page was found for on-device storage or sync after reconnecting.
- The length of an absence (3-30 days) and of an internet outage (12 hours, 3 days, 30 days, 40 days) are assumptions. Battery life is the published maximum; the guide compares 30 days with the shortest published figure.
- The alert points (upper 60%, lower 30%) are this guide’s reading of the EPA (below 60%, ideally 30-50%) and the CDC (no higher than 50%). No source gives a target for an empty home. Pet-specific thresholds were not researched.
- Picks come from the Amazon.com listings checked on October 17, 2026 (delivery to New York 10001): 100+ ratings, 4.0+ stars, sold by Amazon.com or a seller named for the brand, new. One cheapest pick per condition, shipping included. Hub-plus-sensor sets are used only when the listing’s contents are confirmed. Listings with identical rating counts may share them (an observation, not confirmed).
Assumptions
- Length of an absence (assumed): a trip or a long stay away, 3 to 30 days. Comparisons with battery life and on-device storage use the longest, 30 days.: 14 (3–30)
- How long the internet (Wi-Fi) stays down (assumed): a router fault, a power cut or a lapsed plan. The table uses 12 hours, 3 days, 30 days and 40 days.: 3 (0.5–40)
- Upper humidity alert while away: 50-60%, from the EPA (below 60%), the CDC (no higher than 50%). These are not targets for an empty home; picking them as alert points is this guide’s reading.: 60 (50–60)
- Lower humidity alert while away: 30-40%, from the bottom of the EPA’s 30-50% ideal range. Picking them as alert points is this guide’s reading.: 40 (30–40)
Official values used
| Item | Value | Source | Checked |
|---|---|---|---|
| epa_humidity_30_50 | EPA: if possible, keep indoor relative humidity below 60 percent (ideally 30-50 percent); it can be measured with a small, inexpensive ($10-$50) humidity meter. | epa.gov If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 pe | 2026-10-17 |
| cdc_humidity_50 | CDC: keep humidity in the home as low as you can, no higher than 50%, all day long; humidity changes over the course of a day, so check more than once a day; consider not using carpet in places like bathrooms or basements. | cdc.gov Keep humidity levels in your home as low as you can–no higher than 50%–all day | 2026-10-17 |
| epa_basement_condensation | EPA: damp basements promote biological growth including molds; uninsulated concrete slabs are often colder than the basement air, so moisture can condense on the slab and promote mold growth in carpet; the basement should be part of the home’s ventilation strategy. | epa.gov Because damp basements promote biological growth, including molds, they are not | 2026-10-17 |
| epa_condensation_cold_surface | EPA: high humidity (60% RH) is a common moisture problem; when warm, humid air contacts a cold surface, condensation may form; mold is frequently found on walls in cold corners behind furniture. | epa.gov When warm, humid air contacts a cold surface, condensation may form. / Mold is f | 2026-10-17 |
| taylor_humidity_45_55 | Taylor: optimal range is 45-55% RH; a digital hygrometer is the only way to be certain you’re in range; guitars are built at 46% RH; the Wood & Steel guide gives the same 45-55%. | taylorguitars.com Taylor’s stated optimal range for your guitar is “45-55% RH.” / a digital hygrom | 2026-10-17 |
| martin_humidity_45_55 | Martin recommends maintaining your guitar at a relative humidity level of 45-55% and a temperature between 72-77°F (22-25°C); a room or case humidifier can help, particularly in colder months. | martinguitar.com We recommend maintaining your guitar at a relative humidity level of 45–55% and | 2026-10-17 |
| switchbot_meter_remote_needs_hub | SwitchBot says Meter-series sensors can only be viewed within Bluetooth range without a hub; remote viewing and phone push notifications need a SwitchBot hub. | switchbot.jp | 2026-10-17 |
| switchbot_meter_cloud_history_2y | SwitchBot states up to two years of data can be stored in the cloud when a Meter is used with a hub (the US product page also says unlimited cloud storage). | support.switch-bot.com | 2026-10-17 |
| switchbot_meter_onboard_days | Official on-board storage: 68 days for Meter Plus, Outdoor Meter and Meter Pro; 36 days for Meter and Meter Pro CO2 per support article (the US Meter product page says 68 days). | support.switch-bot.com | 2026-10-17 |
| switchbot_meter_export_csv | SwitchBot says Meter-series data can be exported as CSV from the app. | switch-bot.com Data exportable as CSV. | 2026-10-17 |
| switchbot_meter_pro_bt_range | SwitchBot lists Meter Pro Bluetooth range as up to 120 m in open space with no obstacles. | switchbot.jp | 2026-10-17 |
| switchbot_meter_bt_range_394ft | SwitchBot US pages list Meter/Meter Plus at 394 ft (~120 m); the Outdoor page adds ‘no obstacles’. | switch-bot.com View temperature and humidity data from 394ft away. | 2026-10-17 |
| switchbot_meter_pro_calibration | SwitchBot says Meter Pro can be calibrated in the app (Settings → Calibration), temperature and humidity separately, and warns that calibrating to an inaccurate reference can be worse than not calibrating. | support.switch-bot.com | 2026-10-17 |
| switchbot_hub2_wifi_24ghz | SwitchBot Hub 2 supports 2.4 GHz Wi-Fi only (no 5 GHz). | switchbot.jp | 2026-10-17 |
| switchbot_hub3_bluetooth_devices | SwitchBot says the universal remote hubs manage up to 15 Bluetooth devices (12 SwitchBot devices + 3 Bluetooth remotes). | support.switch-bot.com | 2026-10-17 |
| switchbot_hub2_sensor_accuracy | SwitchBot Hub 2 accuracy is shown as +/-1.8% RH / 0.36 F on the US page and +/-0.2 C (0-65 C), +/-2% RH (10-90%) in Japanese material. | switch-bot.com accuracy up to ±1.8% RH/±0.36°F | 2026-10-17 |
| aqara_t1_hub_required | Aqara T1 is Zigbee 3.0 and cannot connect to a phone directly; an Aqara hub is required. Aqara does not list compatible hub models. | aqara.com cannot be connected to the mobile phone directly. | 2026-10-17 |
| aqara_t1_zigbee_range | Aqara lists T1 response distance to the hub as about 10 m indoors (walls allowed) and about 65 m outdoors. | aqara.com Indoor responsive distance is about 10 m (32.81 ft) (walls are permissible). | 2026-10-17 |
| aqara_t1_alert | Aqara T1 pushes a phone notification when conditions leave the comfort zone (can be disabled). | aqara.com it will push notifications to the mobile phone. This function can be disabled in | 2026-10-17 |
| eve_weather_home_hub | Eve Weather requires an Apple TV 4K (2nd/3rd gen 128 GB), HomePod (2nd gen) or HomePod mini as home hub. | evehome.com Apple TV 4K (2nd gen / 3rd gen 128 GB), HomePod (2nd gen), or HomePod mini as a | 2026-10-17 |
| eve_room_home_hub | Eve says controlling Eve Room away from home requires a HomePod or Apple TV (4th gen or later) as home hub. | evehome.com | 2026-10-17 |
| govee_h5075_remote_bt_only | Govee H5075 supports Bluetooth only, no Wi-Fi. Govee’s page does not say a gateway is needed or supported for remote viewing. | us.govee.com No. The product only supports Bluetooth connection. | 2026-10-17 |
| govee_h5179_wifi_direct | Govee H5179 connects over 2.4GHz Wi-Fi without a gateway; 5GHz is not supported. | us.govee.com No. It only works with 2.4GHz Wi-Fi. | 2026-10-17 |
| govee_h5100_h5151_gateway | Govee H5100 is a Bluetooth sensor; paired with the H5151 gateway it becomes a Wi-Fi sensor, up to 10 sensors per gateway (Japan page). | govee-japan.com | 2026-10-17 |
| govee_3lite_gateway_required_for_alerts | Govee’s 3 Lite page says app alerts require the Wi-Fi gateway + sensors version; the gateway is not sold alone and pairs with up to 30 sensors. | us.govee.com please must purchase a Wi-Fi gateway+sensors version, wifi gateway is not sold a | 2026-10-17 |
| govee_h5179_history_20d_2y | Govee H5179 page: 20 days of online storage to view and export, up to 2 years of data. | us.govee.com Enjoy 20 days of online data storage view and export up to 2 years’ worth of dat | 2026-10-17 |
| govee_export_csv_email | Govee exports history as CSV to your mailbox (account login required for H5075; email address entered for H5179). | manualslib.tech Send historical data to your mailbox in CSV format. | 2026-10-17 |
| govee_h5075_bt_range | Govee H5075 Bluetooth range: manual says 50m with no obstacles; US page lists both 60m and 50m (open, unobstructed). No official 80m figure found. | manualslib.tech 50m/164ft (NO obstacles) | 2026-10-17 |
| govee_h5179_bt_wifi_range | Govee H5179: Bluetooth 30m and Wi-Fi 50m, both with no obstructions. | manualslib.tech 30m/49ft (no obstructions) / Wi-Fi range 50m/98ft (no obstructions) | 2026-10-17 |
| govee_h5075_calibration | Govee H5075 calibration range per manual: 3°C for temperature, 20.0% for humidity. | manualslib.tech Calibration range for the temperature is 3ºC/5.4ºF while for the humidity is 20. | 2026-10-17 |
| govee_alert_conditions | Govee sends push alerts when readings leave the preset range; no frequency limit documented. For H5179, delayed alerts are attributed to Wi-Fi stability. | manualslib.tech Cannot receive alerts / alerts delayed: Make sure Wi-Fi signal is stable. | 2026-10-17 |
| govee_onboard_log_unconfirmed | No official Govee page or manual found that documents onboard storage days or sync after reconnecting. | us.govee.com | 2026-10-17 |
| govee_h5179_goveelife_migration | Search summary says Govee UK/CA/US H5179 pages carry a notice about moving appliances to GoveeLife sites; no explicit model discontinuation. | uk.govee.com | 2026-10-17 |
| inkbird_th2plus_onboard_bt | Inkbird IBS-TH2 Plus stores up to 30,000 points on the device; Bluetooth 98ft without obstacles; remote use needs a gateway such as IBS-M2. | inkbird.com stores a maximum of 30,000 points of data on the device. | 2026-10-17 |
| inkbird_m2_gateway | Inkbird IBS-M2: 2.4GHz Wi-Fi, up to 9 Bluetooth sensors, 1-year history, alarm notifications, 164ft Bluetooth without interference. | inkbird.com Maximum Number of Devices Supported: 9 | 2026-10-17 |
| inkbird_th3plus_history_csv | Inkbird IBS-TH3 WIFI PLUS: Wi-Fi direct (2.4GHz), 1-year history, CSV export, calibration ±10, rechargeable ~3 months at 60-min interval. | inkbird.com View historical data of the past year. | 2026-10-17 |
| thermopro_tp357_bt_range | ThermoPro TP357 rated Bluetooth range is 260 ft (80 m) in open space with no obstructions or interference. | temppro.com stable, reliable range of up to 260 feet (80 meters) in open spaces. | 2026-10-17 |
| thermopro_tp357_history_1y | ThermoPro TP357 shows 1 year of history; 2-year exportable data is attributed to TP350/TP358. | temppro.com 1-year data storage with an easy-to-use graph feature. | 2026-10-17 |
| thermopro_tp371_wifi_remote | ThermoPro TP371: 2.4GHz Wi-Fi + Bluetooth, no gateway, remote over internet, up to 2 years exportable CSV; shown sold out. | temppro.com Remote Range: No distance limit over Wi-Fi. | 2026-10-17 |
| tapo_t31x_remote_needs_hub | Tapo T310/T315 need a Tapo hub for remote monitoring, automation and data storage; T315 works as a standalone thermometer without a hub | tapo.com | 2026-10-17 |
| tapo_t31x_history_2years | Tapo sensors retain history for the most recent 2 calendar years; export to CSV via email from the app | tp-link.com The sensor retains historical data from the most recent 2 calendar years. | 2026-10-17 |
| tapo_hub_offline_data | Tapo: if the hub is offline more than ~24 hours earlier data may be lost; rebooting the hub deletes unuploaded history; power-outage data is lost | tp-link.com If the hub remains offline for more than about 24 hours, it may lose earlier dat | 2026-10-17 |
| tapo_hub_history_delete | Tapo: removing the sensor or hub from the app deletes history permanently; H100 10-second factory reset deletes it, 5-second soft reset keeps it | tp-link.com Deleted historical data cannot be recovered. | 2026-10-17 |
| tapo_h100_device_count | Tapo H100 connects up to 64 devices (varies by type); Sub-1G only | tapo.com | 2026-10-17 |
| tapo_t31x_accuracy | Tapo T310/T315 accuracy ±0.3°C / ±3%RH | tapo.com ±0.3℃ / ±3%RH | 2026-10-17 |
| daddario_humiditrak_discontinued | D’Addario Humiditrak is discontinued; Blustream keeps supporting the app for existing users | support.daddario.com the Humiditrak has been discontinued and is no longer available via our website | 2026-10-17 |
| daddario_humiditrak_battery | Blustream FAQ: Humiditrak CR2032 lasts about 4-8 months; impact detection shortens it | humiditrak.blustream.io The battery will last for approximately 4 to 8 months under typical conditions | 2026-10-17 |
| daddario_humiditrak_accuracy | Humiditrak accuracy: humidity ±4% RH, temperature ±0.5°C (Blustream FAQ) | humiditrak.blustream.io humidity ±4% RH, temperature ±0.5°C | 2026-10-17 |
| daddario_humiditrak_bt_range | No official Bluetooth range for Humiditrak and no statement about a closed case; data uploads when back in range | humiditrak.blustream.io Once you enter back into Bluetooth range of the sensor, the data will upload to | 2026-10-17 |
| daddario_hts_no_bluetooth | D’Addario PW-HTS is a standalone display hygrometer with no Bluetooth mentioned, not a Humiditrak successor; 20-99% RH, CR2032 | cdn.shopify.com Accurate Relative Humidity indicator (20% to 99%…) | 2026-10-17 |
| oasis_oh2plus_accuracy | Oasis OH-2+: manual says ±2% at 20-80% RH (±3% at edges); product page says ±3% at 20-80% | oasishumidifiers.com accurate to +/- 2% between 20-80% RH and +/- 3% between 10-20% RH and 80-90% RH | 2026-10-17 |
| oasis_oh2plus_calibration | Oasis OH-2+ can be offset-calibrated ±6% with a Boveda one-step kit (32%/72%); said to be normally unnecessary | oasishumidifiers.com The calibration feature is also included, but shouldn’t be necessary with the im | 2026-10-17 |
| boveda_butler_status | Boveda Butler was replaced by CI Smart Sensor (Cigars International); Boveda has no current Bluetooth hygrometer of its own | help.bovedainc.com The CI Smart Sensor replaced the Boveda Butler digital hygrometer. | 2026-10-17 |
| boveda_hygrometer_accuracy | Boveda: even calibrated, hygrometers are generally within about ±3-5% RH | help.bovedainc.com ±3–5% RH | 2026-10-17 |
| boveda_calibration_75 | Boveda one-step calibration kit takes ~24 hours; reload with a 75% RH Size 8 pack | help.bovedainc.com It takes just 24 hours for professional-level results. | 2026-10-17 |
| boveda_salt_test_caveat | Boveda says a homemade salt test cannot give a precise RH value; it varies with salt-to-water ratio | help.bovedainc.com You’ll never receive a precise relative humidity (RH) reading | 2026-10-17 |
| daddario_humidipak_rh | D’Addario Humidipak Maintain holds 45-50% RH (an older article says 45-55%) | daddario.com | 2026-10-17 |
| boveda_instrument_rh | Boveda large instrument kit: maintains 40-60% RH (the industry standard for wooden instruments) | store.bovedainc.com | 2026-10-17 |
| gibson_rh | Gibson’s blog: ideal storage 40-60% RH | gibson.com | 2026-10-17 |
| fender_rh | Fender (Tacoma support article): 40-60% RH | jp-support.fender.com | 2026-10-17 |
| musicnomad_rh | MusicNomad: 40-55% RH and 70-78°F (21-26°C) | musicnomadcare.com maintain an environment of 40%–55% relative humidity and a temperature between 7 | 2026-10-17 |
| oasis_rh | Oasis: wood is stable at 40-45% RH at ~70°F; humidify below 50% RH | oasishumidifiers.com Guitars are generally made from aged wood that is stable at 40-45% humidity at a | 2026-10-17 |
| salt_75_nacl | Saturated NaCl gives ~75.3% RH at 25°C (Greenspan); sealed chamber, ~24h equilibration; stated uncertainty 1.4% RH + Greenspan | engineering.purdue.edu | 2026-10-17 |
| switchbot_hub_mini_us_meter_unconfirmed | The US SwitchBot Hub Mini page has no text on working with the Meter, and the US Hub Mini Matter page’s device list does not name the Meter series. | switch-bot.com | 2026-10-17 |
Does the record survive an internet outage?: quick reference
The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.
| Settings | Result | Calculator |
|---|---|---|
| SwitchBot Meter (36-day record), 0.5 | ✓ Fits within the 36-day on-device record. This column of the table: Stays on the Meter series (up to 36 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 1 | ✓ Fits within the 36-day on-device record. This column of the table: Stays on the Meter series (up to 36 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 3 | ✓ Fits within the 36-day on-device record. This column of the table: Stays on the Meter series (up to 36 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 30 | ✓ Fits within the 36-day on-device record. This column of the table: Stays on the Meter series (up to 36 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 36 | ✓ Fits within the 36-day on-device record. This column of the table: Stays on the Meter series (up to 36 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 36.5 | ✕ Longer than the 36-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 40 | ✕ Longer than the 36-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 68 | ✕ Longer than the 36-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter (36-day record), 68.5 | ✕ Longer than the 36-day on-device record. This column of the table: Over every Meter-series limit. The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 0.5 | ✓ Fits within the 68-day on-device record. This column of the table: Stays on the device (the Meter Plus, Pro and Outdoor Meter hold up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 1 | ✓ Fits within the 68-day on-device record. This column of the table: Stays on the device (the Meter Plus, Pro and Outdoor Meter hold up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 3 | ✓ Fits within the 68-day on-device record. This column of the table: Stays on the device (the Meter Plus, Pro and Outdoor Meter hold up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 30 | ✓ Fits within the 68-day on-device record. This column of the table: Stays on the device (the Meter Plus, Pro and Outdoor Meter hold up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 36 | ✓ Fits within the 68-day on-device record. This column of the table: Stays on the device (the Meter Plus, Pro and Outdoor Meter hold up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 36.5 | ✓ Fits within the 68-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 40 | ✓ Fits within the 68-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 68 | ✓ Fits within the 68-day on-device record. This column of the table: Over the Meter’s limit; the Meter Plus, Pro and Outdoor Meter still hold it (up to 68 days). The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| SwitchBot Meter Plus, Pro, Outdoor (68 days), 68.5 | ✕ Longer than the 68-day on-device record. This column of the table: Over every Meter-series limit. The on-device record is listed as 36 days for the Meter and 68 for the Plus, Pro and Outdoor Meter. The Meter’s US page says 68, so this guide uses 36. No page says whether records sync once the internet returns | Open with these settings |
| Tapo (T310, T315 hub), 0.5 | △ Handling under 24 hours is not documented. This column of the table: Handling under 24 hours is not documented. The Tapo column assumes the hub stays powered and doesn’t restart. A hub offline for more than about 24 hours may lose earlier data, and handling under 24 hours is not described. Rebooting it deletes data not yet uploaded, and data from a power outage is lost | Open with these settings |
| Tapo (T310, T315 hub), 1 | △ Earlier data may be lost (offline about 24 hours or longer). This column of the table: Earlier data may be lost. The Tapo column assumes the hub stays powered and doesn’t restart. A hub offline for more than about 24 hours may lose earlier data, and handling under 24 hours is not described. Rebooting it deletes data not yet uploaded, and data from a power outage is lost | Open with these settings |


