Contents15

At 55–70% efficiency and 3.6–3.85 V, for phones with 4,056–5,391 mAh batteries, an 18 Wh label (3.7 V, 4,800–5,000 mAh) fills about 47–88%, short of one full charge.

A 37 Wh label gives one full charge with room to spare for the 4,056 mAh table phone, and is borderline for the 4,870–5,391 mAh ones. The chart below shows, for each example battery label, how much of the phone battery a warmer can fill, worked out in Wh.

These are calculations from official descriptions and Amazon.com listings checked in November 2026. No warmer was tested, and the assumptions are listed further down.

Charge chart by battery label

Find the row closest to the label on your warmer. The rows are label examples, not the Wh of the picks below.

The chart assumes 55–70% conversion efficiency and a phone battery of 3.6–3.85 V. Apple doesn’t publish the iPhone’s mAh, so those two figures are the EU energy label values as reported by the press.

Battery label (example) iPhone 18 Pro iPhone 18 Pro Max Galaxy S26 Ultra Pixel 10 Pro
3.7 V, 4,800 mAh (17.76 Wh) Less than one full charge (about 62–85%) Less than one full charge (about 47–64%) Less than one full charge (about 50–69%) Less than one full charge (about 52–70%)
3.7 V, 5,000 mAh (18.5 Wh) Less than one full charge (about 65–88%) Less than one full charge (about 49–66%) Less than one full charge (about 52–71%) Less than one full charge (about 54–73%)
3.7 V, 10,000 mAh (37 Wh) ✓ At least one full charge (about 130–177%) △ One full charge only on the favorable side (about 98–133%) △ Just about one full charge (about 105–143%) △ Just about one full charge (about 108–147%)

✓ means that for every combination of efficiency and voltage in the range, the warmer fills at least a tenth more than one full charge. △ means it comes within a tenth of one full charge, just over or just short, or reaches one full charge on some combinations and not others. “Less than one full charge” means it stays below nine-tenths of one charge on every combination.

For a label that isn’t in the chart, use the calculator below.

Why dividing by mAh alone looks like more

mAh counts the charge in a battery without the voltage, so compare batteries in Wh (energy).

The percent is the warmer battery’s Wh × conversion efficiency ÷ the phone battery’s Wh × 100. Wh = mAh × rated volts ÷ 1,000. Read the volts from the label.

Dividing mAh alone makes a 4,800 mAh warmer look like 118% of the table phone’s 4,056 mAh battery. It is about 62–85% at 55–70% efficiency and 3.6–3.85 V. Voltage alone would only move it to about 113–121%, so most of the gap is conversion loss.

For phones with 4,056–5,391 mAh batteries, a 3.7 V, 5,000 mAh label gives about 49–88%, short of one full charge.

What conversion efficiency to assume

This guide assumes 55–70% conversion efficiency, the share of the warmer battery’s energy that ends up in the phone battery. Some of the energy is lost as heat when charging, and published figures vary with the circuit and with how much can actually be drawn out.

Per Anker’s support pages, circuit efficiency is about 82%, or 80–90%. The MagGo 10K delivers an estimated 6,000–7,000 mAh, and the MagGo FAQ puts the loss in the cells and circuitry at 30–45%. This guide assumes 55–70% of the energy, down to the 45% loss end.

Heating and charging at once, and output

Zippo’s US pages don’t say whether the HeatBank can heat and charge a phone at the same time.

Zippo’s US pages say the HeatBank charges USB devices such as phones, but list no output watts or amps and say nothing about fast charging.

How many watts a phone needs to accept is not covered here, because the phones’ charging limits weren’t checked.

How much warmer battery half a phone charge uses

At 55–70% efficiency and 3.6–3.85 V, charging phones with 4,056–5,391 mAh batteries halfway from an 18 Wh warmer uses about 56% or more of the warmer’s battery. For a phone with a 5,391 mAh battery at the low-efficiency end, the warmer can run out before the phone reaches half. That leaves less for heat.

On a cold day, decide how much to spend on the phone before you start. An official figure for how long a warmer keeps heating afterward wasn’t found in the pages checked.

Check your own warmer’s label

Enter the label on the warmer or in its manual (mAh and volts, or Wh), pick a phone, and pick an efficiency.

Work out how much of your phone a hand warmer power bank can charge

Enter the warmer's battery label (mAh and volts, or Wh), choose a phone and an efficiency. It shows what percent of the phone battery it can fill and whether that reaches one full charge, using assumed ranges for efficiency and the phone battery's voltage.

In the tool, enter the battery label and pick a phone and efficiency, and it shows the percent filled and whether that reaches one full charge.

Picks by condition

Each pick has 100+ ratings and 4+ stars and is sold new. No rechargeable warmer checked here was sold by Amazon or a brand store, apart from OCOOPA listings left out over its recall. So both Zippo picks are sold by a third party, D-C-O, as an exception for a major brand.

Zippo’s US pages list 4,400 mAh for the HeatBank 6 and 5,200 mAh for the HeatBank 9s, but no rated voltage, so enter the label in the calculator.

Zippo’s US pages list the HeatBank 6 at 0.31 lbs, about 5.0 oz, and the HeatBank 9s at 0.35 lbs, about 5.6 oz.

For a warmer that can charge USB devices such as phones

Zippo’s US page says it charges USB compatible devices. Its 4,400 mAh battery is below the smallest row in the chart, so enter its label in the calculator.

Sold by D-C-O.

For a larger battery of 5,000 mAh or more

Zippo’s US page lists a 5,200 mAh battery. How much of a phone it fills depends on its label, so enter that in the calculator.

Check prices on Amazon.com.

FAQ

How much of a phone can a hand warmer power bank charge?

At 55–70% efficiency and 3.6–3.85 V, for phones with 4,056–5,391 mAh batteries, an 18 Wh label (3.7 V, 4,800–5,000 mAh) fills about 47–88%, short of one full charge.

Why does dividing by mAh alone make it look like more?

Dividing mAh alone makes a 4,800 mAh warmer look like 118% of the table phone’s 4,056 mAh battery. It is about 62–85% at 55–70% efficiency and 3.6–3.85 V.

Voltage alone would only move it to about 113–121%, so most of the gap is conversion loss. For phones with 4,056–5,391 mAh batteries, a 3.7 V, 5,000 mAh label gives about 49–88%, short of one full charge.

What conversion efficiency should I assume?

This guide estimates that 55–70% of the energy ends up in the phone. Published figures vary, so the low end of that range allows for a large loss.

Can I use the warmer for heat while it charges a phone?

The US maker pages checked here don’t say whether a warmer can heat and charge a phone at the same time, so check the manual before relying on it.

How much of the warmer’s battery does half a phone charge use?

At 55–70% efficiency and 3.6–3.85 V, charging phones with 4,056–5,391 mAh batteries halfway from an 18 Wh warmer uses about 56% or more of the warmer’s battery. For a phone with a 5,391 mAh battery at the low-efficiency end, the warmer can run out before the phone reaches half.

That leaves less for heat.

Data and formulas used (for verification)

Method

  • Percent of a phone battery = the warmer battery Wh × conversion efficiency ÷ the phone battery Wh × 100 (this guide’s own calculation). Wh = mAh × rated volts ÷ 1,000. Phones publish only mAh, so their Wh uses an assumed 3.6–3.85 V.
  • Conversion efficiency (how much of the warmer battery’s energy ends up in the phone, over a cable) is assumed at 55–70%, where the low end matches the 45% loss in the MagGo FAQ. Anker’s support pages put circuit efficiency at about 82% or 80–90%, and say the MagGo 10K delivers an estimated 6,000–7,000 mAh. Every conclusion was checked across the full efficiency and voltage ranges.
  • The table rows are label examples (3.7 V at 4,800, 5,000 and 10,000 mAh; Anker gives 10 Ah × 3.7 V = 37 Wh). Zippo’s US pages list mAh but no rated voltage, so no Wh or percent is worked out for the picks.
  • Phone batteries: iPhone 18 Pro and Pro Max from Apple’s EU energy label as reported by two outlets, Galaxy S26 Ultra from Samsung’s US page (typical), Pixel 10 Pro from the Google Store spec page (typical).
  • Picks meet affiliate.mjs (100+ ratings, 4+ stars, sold by Amazon or the brand, new, known shipping), one per slot. Both Zippo picks are sold by a third party (D-C-O); that rule was waived for them only (user decision, November 12, 2026). Nothing was tested.

What Zippo’s US pages say (checked November 12, 2026)

Product Battery Output Heating while charging Weight Source
Zippo HeatBank 9s Rechargeable 5200 mah lithium-ion battery (included) Charges USB compatible devices including; mobile phones, Mp3 players, tablets, cameras, etc. Not stated Weight: 0.35 lbs. zippo.com
Zippo HeatBank 6 Rechargeable 4,400 mAh lithium-ion battery (included) Charges USB compatible devices including; mobile phones, Mp3 players, tablets, cameras, etc. Not stated Weight: 0.31 lbs. zippo.com
  • The pages list mAh but no rated voltage or Wh, and no output watts or amps.

Phone batteries (same figures as this site’s power bank guides)

Phone Battery Wh (assumed 3.6–3.85 V) Source
iPhone 18 Pro 4,056 mAh 14.6–15.7 Wh tomsguide.com
iPhone 18 Pro Max 5,391 mAh 19.4–20.8 Wh tomsguide.com
Galaxy S26 Ultra 5,000 mAh 18–19.3 Wh samsung.com
Pixel 10 Pro 4,870 mAh 17.5–18.8 Wh store.google.com
  • iPhone 18 Pro and Pro Max: Apple’s EU energy label as reported by two outlets (Apple’s product pages don’t list mAh). Galaxy S26 Ultra and Pixel 10 Pro: typical capacity. US eSIM-only iPhone models are reported to have slightly larger batteries; their capacities weren’t confirmed.

Percent of a phone battery (every combination of 55–70% efficiency and 3.6–3.85 V; both ends rounded down)

Warmer battery label iPhone 18 Pro iPhone 18 Pro Max Galaxy S26 Ultra Pixel 10 Pro
3.7 V, 4,800 mAh (17.76 Wh) 62–85% 47–64% 50–69% 52–70%
3.7 V, 5,000 mAh (18.5 Wh) 65–88% 49–66% 52–71% 54–73%
3.7 V, 10,000 mAh (37 Wh) 130–177% 98–133% 105–143% 108–147%
  • Calculation (this guide’s own): percent = warmer battery Wh × conversion efficiency ÷ phone battery Wh × 100; Wh = mAh × rated volts ÷ 1,000 (Anker). Over a cable. The rows are label examples; the 37 Wh row matches Anker’s 10 Ah × 3.7 V = 37 Wh example.
  • Ratings (this guide’s own rule): ✓ if 110% or more across all assumptions, “less than one full charge” if under 90% across all, △ otherwise (crossing 100%, or within 10% of it: “just about” at 100–110%, “just short” at 90–100%). The 55% low end matches the 45% loss in the MagGo FAQ.
  • Share of the warmer battery used to fill half a phone (18 Wh rows × 4 phones): about 56–107%. Over 100% means the warmer runs out before half (iPhone 18 Pro Max, low-efficiency side).

Picks (Amazon.com; the body shows no prices)

Product ASIN Price Seller Checked
Zippo HeatBank 6 B091B5Z3CJ $32.99 D-C-O 2026-11-12
Zippo HeatBank 9s B07Q6GQM9D $44.99 D-C-O 2026-11-10
  • Both picks show free delivery (shipping 0).
  • Left out of the power bank slot: Zippo HeatBank 9s: meets the bar but costs more. NFL Tennessee Titans: HeatBank 9s Recharge: shipping not confirmed; sold by a third party (IPDistributors).
  • Left out of the larger battery slot: NFL Tennessee Titans: HeatBank 9s Recharge: shipping not confirmed; sold by a third party (IPDistributors).
  • Listings outside every slot (cheapest first): Lerat 2 Pack Hand Warmers Rechargeable: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (HGSST). Hand Warmers Rechargeable, 2 Pack Portable: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (ZhuCheng-US). Hand Warmers Rechargeable 2 Pack, 4-Levels: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Szhh68). Rechargeable Hand Warmers 2 Pack, 2-in-1 M: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (AJVV-US). Hand Warmers Rechargeable 2 Pack, 6000mAh: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (kuaiken). Hand Warmers Rechargeable 2 Pack, 2-in-1 M: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (HAWANA-US). AI Hand Warmers Rechargeable 2 Pack, AI Sm: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Heelkl Fan Store). OCOOPA Hand Warmers Rechargeable, Smart Te: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; left out: the OCOOPA brand has a CPSC recall (July 30, 2026) and this listing’s model couldn’t be matched; shipping not confirmed; sold by a third party (OCOOPA Direct). Hand Warmers,20H Heat,Rechargeable, Heat O: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Greemoor Store). Hand Warmers Rechargeable - Electric Hand: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Beyyon). OCOOPA Dual-Sided Hand Warmers Rechargeabl: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Fuaxin). Hotdot Rechargeable Hand Warmers 2 Pack, L: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (Weilantor). OCOOPA Hand Warmers Rechargeable 2 Pack, M: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; left out: the OCOOPA brand has a CPSC recall (July 30, 2026) and this listing’s model couldn’t be matched; shipping not confirmed; sold by a third party (OCOOPA Direct). Hand Warmers Rechargeable - Electric Hand: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (linhandianzi). Hand Warmers Rechargeable 2 Pack,10000mAh: no Zippo US spec page for this listing, so no maker statement that it charges USB devices; shipping not confirmed; sold by a third party (taeho kim).
  • Not checked: the picks’ rated voltage, Wh and output, an official efficiency figure, charging time, and how long the warmer heats after charging a phone. Nothing was tested.

Assumptions

  • 55-70% of the energy in Wh. The 55% low end matches the worst case of the 30-45% loss in the MagGo FAQ; this guide widens the 60% floor used in the power bank guides so the source’s unfavorable end is inside the range. The 70% top follows Anker’s 6,000-7,000mAh from 10,000mAh. It varies with the model, temperature and cable.: 0.625 (0.55–0.7)
  • Nominal voltage of the device battery, used to turn mAh into Wh for devices that publish only mAh (iPhone, Galaxy, Pixel). Same 3.6-3.85V span as the bank cell; the high side (more Wh) is the conservative end.: 3.7 (3.6–3.85)
  • No primary source gives a number for wireless vs wired loss, so the article only says wireless is less efficient.: “not found” (0–0)

Official values used

Item Value Source Checked
wh_formula Wh = mAh x V / 1000 formula service.anker.com ‘Energy in Watt-hours = Capacity in Ampere-hours × Voltage in Volts’ 2026-10-10
wh_10000mah_at_3_7v 37 Wh service.anker.com ‘10Ah × 3.7V = 37Wh’ 2026-10-10
cell_nominal_voltage_v 3.7 V service.anker.com ‘which typically operate at a voltage of around 3.7V’ 2026-10-10
circuit_efficiency_anker 0.82 ratio service.anker.com ‘typically around 82% efficiency’ 2026-10-10
circuit_efficiency_anker_uk_range 0.8–0.9 ratio anker.com ‘operate at around 80–90% efficiency’ 2026-10-10
usable_of_10000mah_wired_mah 6000–7000 mAh anker.com ’a fully charged Anker MagGo Power Bank (10K) offers an estimated 6,000mAh to 7, 2026-10-10
iphone18pro_battery_mah_eu 4056 mAh tomsguide.com ‘iPhone 18 Pro will have a 4,056 mAh battery’ 2026-10-10
iphone18promax_battery_mah_eu 5391 mAh tomsguide.com ‘5,391 mAh capacity in the EU’ 2026-10-10
galaxy_s26_ultra_typical_mah 5000 mAh samsung.com ‘5000 mAh ultra-long lasting battery for all-day performance’ 2026-10-10
pixel_10_pro_battery_mah 4870 mAh store.google.com 2026-10-10
cpsc_ocoopa_recall CPSC, July 30, 2026: OCOOPA Direct recalled about 1.5 million rechargeable hand warmers (models UT3053, UT3056, ZLS-118, ZLS-118S, ZLS-118D, H01, H01 PD) sold Sept 2018 to May 2026 on Amazon.com, Ocoopa.com, Ocoopa.net and Walmart.com. CPSC reported 1,480 overheating reports, 15 fires, 350 burn injuries and one death. cpsc.gov The lithium-ion battery in the recalled hand warmers can overheat and ignite, po 2026-11-12

Work out how much of your phone a hand warmer power bank can charge: quick reference

The calculator in this article shows the result and a matching product for your own settings. Settings can be set in the URL; each link below opens the calculator with those settings.

Settings Result Calculator
Example: 3.7 V, 4,800 mAh, iPhone 18 Pro, 55–70% (this guide’s assumed range) Less than one full charge (about 62–85%). Warmer battery 17.76 Wh (4800mAh × 3.7V ÷ 1000). iPhone 18 Pro: 4056 mAh = about 14.6–15.7 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 58–80% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 4,800 mAh, iPhone 18 Pro Max, 55–70% (this guide’s assumed range) Less than one full charge (about 47–64%). Warmer battery 17.76 Wh (4800mAh × 3.7V ÷ 1000). iPhone 18 Pro Max: 5391 mAh = about 19.4–20.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 78% or more of the warmer’s battery; on the cautious side it runs out before half. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 4,800 mAh, Galaxy S26 Ultra, 55–70% (this guide’s assumed range) Less than one full charge (about 50–69%). Warmer battery 17.76 Wh (4800mAh × 3.7V ÷ 1000). Galaxy S26 Ultra: 5000 mAh = about 18–19.3 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 72–99% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 4,800 mAh, Pixel 10 Pro, 55–70% (this guide’s assumed range) Less than one full charge (about 52–70%). Warmer battery 17.76 Wh (4800mAh × 3.7V ÷ 1000). Pixel 10 Pro: 4870 mAh = about 17.5–18.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 70–96% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 5,000 mAh, iPhone 18 Pro, 55–70% (this guide’s assumed range) Less than one full charge (about 65–88%). Warmer battery 18.5 Wh (5000mAh × 3.7V ÷ 1000). iPhone 18 Pro: 4056 mAh = about 14.6–15.7 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 56–77% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 5,000 mAh, iPhone 18 Pro Max, 55–70% (this guide’s assumed range) Less than one full charge (about 49–66%). Warmer battery 18.5 Wh (5000mAh × 3.7V ÷ 1000). iPhone 18 Pro Max: 5391 mAh = about 19.4–20.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 74% or more of the warmer’s battery; on the cautious side it runs out before half. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 5,000 mAh, Galaxy S26 Ultra, 55–70% (this guide’s assumed range) Less than one full charge (about 52–71%). Warmer battery 18.5 Wh (5000mAh × 3.7V ÷ 1000). Galaxy S26 Ultra: 5000 mAh = about 18–19.3 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 69–95% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 5,000 mAh, Pixel 10 Pro, 55–70% (this guide’s assumed range) Less than one full charge (about 54–73%). Warmer battery 18.5 Wh (5000mAh × 3.7V ÷ 1000). Pixel 10 Pro: 4870 mAh = about 17.5–18.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 67–93% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 10,000 mAh, iPhone 18 Pro, 55–70% (this guide’s assumed range) ✓ At least one full charge (about 130–177%). Warmer battery 37 Wh (10000mAh × 3.7V ÷ 1000). iPhone 18 Pro: 4056 mAh = about 14.6–15.7 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 28–39% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 10,000 mAh, iPhone 18 Pro Max, 55–70% (this guide’s assumed range) △ One full charge only on the favorable side (about 98–133%). Warmer battery 37 Wh (10000mAh × 3.7V ÷ 1000). iPhone 18 Pro Max: 5391 mAh = about 19.4–20.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 37–51% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 10,000 mAh, Galaxy S26 Ultra, 55–70% (this guide’s assumed range) △ Just about one full charge (about 105–143%). Warmer battery 37 Wh (10000mAh × 3.7V ÷ 1000). Galaxy S26 Ultra: 5000 mAh = about 18–19.3 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 34–48% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings
Example: 3.7 V, 10,000 mAh, Pixel 10 Pro, 55–70% (this guide’s assumed range) △ Just about one full charge (about 108–147%). Warmer battery 37 Wh (10000mAh × 3.7V ÷ 1000). Pixel 10 Pro: 4870 mAh = about 17.5–18.8 Wh (assuming 3.6–3.85 V). Filling half the phone uses about 33–47% of the warmer’s battery, leaving that much less for heat. Zippo’s US pages don’t say whether the HeatBank can heat and charge at the same time. Dividing mAh alone overstates it, mostly by ignoring conversion loss Open with these settings